Jump to content
SAU Community

Recommended Posts

Just wondering if anyone knows how to get that wicked 'flutter' sound, when backing of the throttle on a turbo. Im not sure, but I think it may be the wastgate? Or is it a particular type of BOV? Heaps of tough VL RB30's do it, specially that yellow Bresciani racing monster!

Link to comment
https://www.sau.com.au/forums/topic/74592-how-to-get-that-flutter/
Share on other sites

Block off you blow off valves so that all waste air from closing the throttle has to go back through the compressors on your turbos. This will cause massive surging to your turbos - some people say it damages them - and make that flutter sound. Problem is you slow the turbos down every time you hear it, causing it to take longer to get back on boost.

In short it isn't the sound of an effective street turbo setup unfortunately.

Yeah my car makes that noise, u just have to push it really hard to get it. Reason mine does it is that my stock BOV cant support the ammount of boost im running. Its not good for the turbo so dont do it. Need to find me some Twin GT-R BOV's.

Im puttin one of those new exhaust tips on so it goes, wooo wooooo wooo woooooooo

http://media.ebaumsworld.com/bubbrubb.wmv

pwwahaha "das early in the mornin , got be up cooking breakfast by den" magic !wonder if my bovs will make it on sandra sully's table this arvo ?

i just bought a new stock bov coz the stock one that was on the car when i bought it had been welded shut to stop it from opening

i'll take a pic tonight of the bottom of it to give you an idea..... sounds cool for a bit, but you get sick of it lol, and it does slow you down, coz the turbo almost needs to respool after every gear change.

-ruffels

mine flutters with a turbosmart BOV.. the tension in the spring is just a little tighter so that the air cant hold the piston open for long, so it does lots of little sharp bursts

only does it when you ease off the throttle tho, when you let off fully its just a normal bov sound

Yeah, when I took my car for a drive once it was cleared by customs it made that sound, turns out there was a screw in the stock bov, so they had blocked it off for that sound. Sound was sweet, but does the turbo no good. I haven't heard the sequential bov, would it make a similar sound though????

I CALL BULLSHIT

Bullshit yourself mate, you dont know anything about my car. A stock BOV cant handle 17 Pounds of boost...

Damn i didnt know people were so dumb in western australia, guess its true what they say

Bullshit yourself mate, you dont know anything about my car. A stock BOV cant handle 17 Pounds of boost...

Damn i didnt know people were so dumb in western australia, guess its true what they say

Considering most stock bov's leak in between 12-15psi, that's where the bullshit factor come into it, and if you're not bullshitting your losing power. I'm sure running 17psi with it is doing your turbo a world of good too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...