Jump to content
SAU Community

Recommended Posts

Ive got a 3 inch dump from the turbo to a 3 inch cat. Im looking at the split dumps where the wastegate is seperated from the turbine and reconnects about 40cm later. Im trying to understand it, but if im running 19psi, the wastegate is closed so how do i get more performance? Or does the wastegate slightly open over 19psi therefore the gases dont mix with the turbine gases straight away but being 40cm further would create less turbelance.

Any thoughts?

bass afaik the idea of an ebc is to not have the wg open at all until you hit max boost.

robo's re the long wg pipe, when your wastegate is venting fully (at max boost) it figures that you're also at max power and therefore pushing max gas out of the turbo and into the exh pipe. that's when you want best flow ie least backpressure. joining the paths of the wg and exh gas creates back pressure as it impedes the exhaust flow. moving the junction further down the exh pipe reduces this effect, in theory the best set up is the screamer where the wg pipe does not join the exh at all.

I've got a split dump/front and can only speak highly of it. Gained around 10rwkw from this pipe alone ove stock. I dunno how much of a gian you'll get if you already have a larger dump, but the reduction in turbulance theory certainly makes sense...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I believe mine is helical and not clutch type. During drifting one wheel was spining as if it was open diff so bought kazz 1.5 way and has sat on my shelf for the past 5 years as I want to learn shiming process and do it myself   in meantime thought I change the diff oil hence post here. So any 75-90?   i am pretty sure r34 are helical not clutch lsd as standard . That is gtt ones
    • Throw between gears are so much that is getting annoying. I have pro short shifter on my mx5 and e36 and love it . Skyline is getting unbearable    would syncro issues and short shifter is no no? Anyone mind explaining a little on why before i buy cube
    • No. Well, some people "seem to use redline shockproof in the diff". Most do not. I would only contemplate it if you have badly worn CW&P gears. And no. No-one in their right mind has ever put ATF into a diff. Any normal diff/gear oil of the right viscosity will do. Whatever takes your fancy. Castrol, Nulon, Penrite, Redline MT range. Whatever. It's just gears. 75W-90 or 80W-90 is typical. I think that GL-5 is hard to avoid these days, although I think that a GL-4 is probably preferred, given the vintage of the equipment. At least Redline offer a number of GL-4 oils. If you have a clutch type LSD instead of the VLSD, then of course you need a proper LSD oil. Anything from any of the same names above. If you have a helical LSD, then it does not require LSD oil, and the recco is the same as for the VLSD. You don't want the LSD friction modifiers in the oil for a non-clutch type LSD if you can avoid it.  
    • You may want to list it up for a little higher - This price is much lower than you may realize. Here you're pretty much selling to people who most likely already have these things on their own rigs. S chassis people eat this stuff up like you'd not believe.
    • I had my car for over 10 years and done around few thousand miles but never changed the oil. thinking of changing it.   what brand and viscocity would you put in ? people seem to use redline shockproof in the diff   on  contraty seen others using atf dexron 2 or 3 so wanted to check. is it 1 liter?
×
×
  • Create New...