Jump to content
SAU Community

Recommended Posts

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

i have a auto r32 4 door....i've got a garrett gt30, fmic, pod down the front for cai and a 3 inch turbo back exhaust with no cat....

i made 226hp at the wheels (around 170kw) and 567nm of torque on 10 psi of boost.....in an auto its good because you don't loose boost during gear changes.... when my car was standard i raced a 2 door r32 even though it was a rolling start and he took off one car length ahead of me i won by around 3 car lengths....

the guy who does the work on my car owns a turbo torana with a stally and a 2 speed auto, he ran a 10.7 even after his fuel cut out the last 100m of the quarter...

he told me in an auto you will lose some power but might make up cos you won't lose boost through gear changes, my first changes at 8 grand so its a bit sluggish...

he told me in a manual i will feel the power more....and if i'm a good driver than i will do good down the quarter....but most ppl who want to go quick usually get an auto for the pure fact that boost is not lost through the gear changes....

I'm running my car next week so ill let you guys know how i do....

then ill do a before and after.....

:crazy:

man that is very cheap . did he explain why it was so cheap ? id be wondering .....

if you look around you can find a full manual conversion kit for under a grand

for an rb20det it was $900

The kit consists of: Gearbox & cross member & Tailshaft

Flywheel & Bolts

Clutch & bolts

Clutch & Brake Pedals

Clutch Master & Slave Cyl (pipe not cut)

Sandwich Plate

Body Dust Seal & Gearstick Boot

It contains everything to convert Auto To Manual.

if your in luck the clutch will be good, whoever does it will machine your flywheel aswell....but i would buy a new clutch.....

if you ask around for labour then you might get it cheaper than 2 grand all up....

also depending on how much your clutch costs....

and if you need help there's guys that have done the conversion and know how to perfect it just use the search and there's all the info you need....

Nah it didnt do anything on the dyno

But with the change of power to the shifts thats the power gain i were getting at compared to what a manual would lose they'd be very similar one would think now.

The best thing about autos though is no paying for clutches :)

But that isn't a change in power, its less time between shifts.

Depends which way you look at it.

With the standard valve bodies the gears will change slowly as to not jolt the car to make it a smooth ride.

With a modified torque/stall converter power is not restricted nor lost as its transfered alot faster.

*shrugs*

if you look around you can find a full manual conversion kit for under a grand  

for an rb20det it was $900  

The kit consists of:         Gearbox & cross member  & Tailshaft

                                    Flywheel & Bolts

                                    Clutch & bolts

                                    Clutch & Brake Pedals

                                    Clutch Master & Slave Cyl (pipe not cut)

                                    Sandwich Plate

                                    Body Dust Seal & Gearstick Boot

It contains everything to convert Auto To Manual.  

if your in luck the clutch will be good, whoever does it will machine your flywheel aswell....but i would buy a new clutch.....

if you ask around for labour then you might get it cheaper than 2 grand all up....

also depending on how much your clutch costs....

and if you need help there's guys that have done the conversion and know how to perfect it just use the search and there's all the info you need....

Could you point me in the direction of where to get one of these R32 GTS-t full manual conversion kits for 900?

  • 4 weeks later...
I have to agree with you though, the few who try and give me a run all apear in the rear view vission mirror.

haha

yor funny old man

i know who would win with an auto vs manual with same mods

id say most 200kw manuals would put pay to your 220kw auto

besides, who wants to drive an auto?

not me

i aint no taxi driver (even if i do have 4 doors)

I dare say the myth is based on the rough calculation of manual drivetrain losing 30%. I would guess it wouldn't be a long shot for an auto with a dodgy torque converter to bump the loss up to 40%. It's definaltely not 40% OVER a manual. that's just stoopid. why do all good drag cars run autos?

saying that, i'm a manual lover, you just dont "drive" an auto the way you do a manual. takes some of the skill out of it :P imo.

id say most 200kw manuals would put pay to your 220kw auto

Please explain why a 220kw car should be beaten by a 200kw car? (Assuming similar suspension setups and equal driver skills)

Remember an auto can start on boost, unlike a manual, and it gets the benefit on more torque. There is a reason why almost all top levels of motor sport (drag, F1, rally) use auto boxes. You sound like just another 15yr old NOOB talking out of your ***.

There is a reason why almost all top levels of motor sport (drag, F1, rally) use auto boxes. You sound like just another 15yr old NOOB talking out of your ***.

mate, Formula 1 cars DO NOT use auto gear boxes. they are full manual up and down shift. Rally Cars DO NOT used auto gear boxes. V8 Super Cars DO NOT use auto gear boxes. Sports Sedans DO NOT use auto gear boxes. JGTC cars DO NOT use auto gearboxes. Other than drag racing no top level form of motor sport uses auto gearboxes.

Yes, auto's have an advantage at the drag strip. big deal. if you wanted a drag car I think you would be better off with an 800kg 13b turbo powered RX3 with a two speed. Any other form of motorsport and the only auto you will see is on the cars and trucks that are used to tow the race cars.

Formula 1 cars DO NOT use auto gear boxes...

:werd: alot of people mix up sequential manuals with autos. I call them automatic manuals ie the shift is automatic, but the box isn't; no torque converter, no planetary gear system, etc. If it has a torque converter it's an auto, if it dont, a manual. simple.

So 4 door sleeper, it would appear that YOU are the "15 yr old NOOB talking out of your ***" :)

I cited the drag strip argument to illustrate nothing more than that every auto in the world isn't utterly shite beside a manual. saying that, no full auto could ever emulate the insight of correct gear selection before reaching a corner etc, nor can it offer the weight set up into corners etc. I'll say it again, you dont DRIVE an auto, save fiddling with the throttle to try and get the f*&ker into the gear you want.

I'd even go out on a limb and say that drag racing is the only racing that an auto is suited for. Awesome for starts, cause all you have to think about is the right revs, then stomp it as soon as you're off the brakes. no clutch bite to worry about.

Remember an auto can start on boost, unlike a manual,

dont know much about manuals eh?

i can start on boost

i just rev up (to say 5000rpm)

let clutch out, revs drop slightly boost comes on straight away

voila, lauching on boost!

im sure if autos were the shit as you preach pops, that gtrs and other performance cars would come in auto as standard

they dont seem to though do they?

autos have their place though (drag cars, cars for people that are easily distracted and need two hands on the wheel at all times, taxis)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Rear doors central locking wiring removed and cleaned. See the first 8sec video of when it’s filled with river silt. its a snip of what I’m up against. front and rear doors complete now. Maybe another day removing carpet and bits and pieces. Then the re assembly begins. 🤙 att.DqweJqhY5MZiZYQDVMhn3LtvdD1RBZ7TBG4f2s7W1zM.mp4 att.lFuN22MZEowqCbFAXoDw009r2gHL76ChMVfxMfBX-uk.mp4
    • There aren't boost creep issues, it's not engineered around the restriction of the cats but if you haven't tuned the engine a full decat + exhaust can flow enough air to run off the end of the OEM load scales and you will get a pretty substantial reduction in ignition timing as a result. I recommend using DFCO, avoiding ignition cut limiters, and avoiding popcorn tunes along with running a cat unless you enjoy a perpetually soot-covered and potentially burnt bumper.
    • Small update, it's been slow moving over the Christmas period with money having to go everywhere thats not my car 😅. I got myself a little present to myself from "santa" in the form of some tidy radiator mounts from fitmint automotive to get rid of the stock ones that look like they have been in an accident before and then straightened by a caveman. I know I should've replaced the rubber bush at the same time but I had no idea how bad they were until I was replacing the mounts. Decided to order their dash mat while I was at it as I feel like I am lucky enough to have a pretty decent condition dash and I don't want to risk it being ruined while it's parked in the aussie sun while I'm at work. I have found another electrical fault to add to the evergrowing list to eventually chase down. Every time I replace my taillight globe it blows within a day of use, I'm starting to think my life would be easier if I took a few minutes to learn how to use  a multimeter 😂.   Had some luck with finding a series 2 drivers headlight on marketplace to replace my mismatched series 1 headlight, a subtle difference but it's nice to have a matching set of lights now.   I returned to the air con problem due to being sick of this summer heat, found a good condition condenser to replace my leaking one! I got it in the car and was happy when I got the thumbs up that the system was now holding gas. Sadly the compressor is not kicking in for some reason, we even tried branching the relay in the fuse box. I have tried to do some research on the issue with no clear understanding of what the fix is, so for now it will be placed on the backburner until I can be bothered to look into the wiring to the compressor. The last small mods I have done was cutting the horizontal vents out of the front bar, not really in a functional airflow sense but I just think it looks better as I am not a fan of the series 2 bar. I also switched the shift knob out for a hosoboyo aluminium grex style one, it has a really nice more direct driving feel than the outdated rubbery oem one. Thirdly, I chucked on one of the ebay bonnet strut kits. The fitment is decent and they seem to work fairly well. They have only given out once while the car was parked facing downhill, I think if I was working under the bonnet I would still put the oem hood stay up to be precautionary as to avoid getting a speedy concussion.
    • Got pneumonia, haven’t played with her in a while, but I’m back now. Previous owners cut bonnet pins into the bonnet. My choice try find a replacement or spend $15 get some pins myself to cover up. Now only one small hole to cover. looks shit now, but when the bonnet is red again. Be good 🤞
    • No R32 GTSt had 15" wheels. 205/55-16 was standard GTSt fare. 4.36:1 is standard R32 turbo auto diff. I think the manual was too, not 4.11. 4.11 and 4.08 were R33 namual and auto respectively.
×
×
  • Create New...