Jump to content
SAU Community

Recommended Posts

I have been practicing my emergency braking lately after getting new pads and machined rotors and have noticed. my oil warning light will flash on for a second. Has anyone else seen this under heavy braking. I guess it is probably normal and nothing to worry about. I hope.

And yes my oil levels are correct.

Link to comment
https://www.sau.com.au/forums/topic/75339-oil-warning-light-when-heavy-braking/
Share on other sites

Thats not good, you are getting oil surge.

What type of oil are you running and how hot is the car when you are doing this because i wouldn't expect to have problems as the oil pick up is up the front of the sump and the oil would be sloshing to the front under braking.

Do you have a bent sump by any chance?

I am running redline 10w 40 and its happening when engine is at operating temp. Its a pressure light. My sump aint bent either. Has anyone else seen or heard of this happening.

Only happening under very heavy braking and just before i come to a stand still. And only for a second.

the light that always comes up on my 32 is the funny thing with heat waves coming of it... is that engine temp or something>>?? or the oil one... cus sometimes i'll just be driving and it comes on but it flashes irregularly... then i will restart the car and it'll be alright.. just depends... Can any1 help with this?>

I wouldn't worry unless you are unemployed.....a new cat can set you back 3-400.

As for the oil pressure light coming on...I would assume that while the engine is running you would only have 2-3 litres of oil in the sump at any one time, therefore, a VERY hard brake would send this oil flying towards the front. Even though the pickup is at the front, you can still fit 2-3 litres in front of it. I would say that BHDave is correct in saying you are experiencing oil surge. It only takes a split second for it to suck a small amount of air and the pressure drops to zero for a split second after that, hence the light coming on, until regular oil pressure returns.

I seriously think you don't have anything to worry about but if you are, take it to a mech who has an oil pressure guage and get your car tested.

Oil surge is pretty simple.....all the oil in a wet sump engine like an rb comes thru the oil pick up in the sump. It is in one place usually at the deepest part.

But as the car moves around (esp under high g forces) the oil can move around so much that there is no oil for it to pick up. Result...no oil to the pump and therefore not going around your engine. eeeek.

There are a heap of techniques to deal with this in Rbs such as bigger sumps, baffles and trapdoors in the sump, restrictors in the oil line to the head, foam in the cam covers, larger oil return galleries.

Under brakes is one of the biggest g forces most cars have, and if there is low oil level yhou might get this problem. I know you said your oil levels are correct which is why I didn't mention this first.

Also could be a problem with the oil pressure sensor? Perhaps get a workshop to add an extra oil guage as a first step if you are sure oil levels are OK.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Um. No. Since Matt introduced the TIM it has become a lot easier to deal with the consequences of changing K for AFM and injector swaps. Then, tuning is a f**king doddle. No-one needs to know or care how many grams of air are flowing or any other bullshit. Need more fuel in a cell? Add more fuel. Need more timing in a cell. Add more timing. Need to adjust any of the other tables for warm up and so on? No harder than anything else. Sure - it's not an ECU system for starting from scratch on an arbitrary engine. But then.....it was never supposed to be, not recommended for, and almost never used that way. So.... On your engine, in particular, Nistune/Nissan OEM is about as sophisticated and difficult as banging 2 rocks together. Those ECUs are primitive and simple. There is nothing difficult there. I learnt Nistune from scratch, created new maps with extended axes, interpolated/extrapolated the original maps onto them and tuned my RB20 (basically the same ECU as your 26 ECU) all by myself, more than 20 years ago. And that was long before even TIM.
    • Set of knee pads for a R34. Will fit every model I think. Comes with everything except the rubber covers for the bolt holes. Still in great condition. You will need to drill holes to mount these or use double sided tape. I can do free shipping and will be shipping from the Netherlands with tracking.
    • Nistune needs something like an entire excel spreadsheet in which you build an abstraction layer that converts everything from real units you can actually measure into all of the various tables. The number of unexpected dependencies hiding in how the Nissan ECUs do math is a pretty impressive optimization trick for 8-bit MCUs but good god is it awful to actually work with in practice. 
×
×
  • Create New...