Jump to content
SAU Community

Recommended Posts

ecu will reset - that will retard (?) the timing a bit but it will re-learn itself quickly.

people take off their battery all the time whether it wud be for a sound install, or installing an rsm/pfc whatever...

its not a big deal.

do it too often and your battery wont hold charge.......and then your car will explode into a huge ball of flame sucking everything into it, then the chasis will implode in on itself and totally disappear into another dimension.

Ok cool thanks mate. I left my lights on the whole day at uni 2 weeks ago. Imagine my surprise finishing an 8 hour day with a flat battery and then finding a parking ticket on my windshield :|

damn, thats gotta suck.

hrmm doesnt the r34 have auto lights off or a chim which tell ya u've left your lights on ?

damn, thats gotta suck.

hrmm doesnt the r34 have auto lights off or a chim which tell ya u've left your lights on ?

Yes it does have an auto chime when the engine is not running and you either;

a) open the door with the keys still in the ignition, or

B) open the door when the lights are on

BUT, this is a common scenario:

- you have been driving with your headlights on

- you park the car, switch off the ignition, turbo timer is still running the engine

- remove the keys and open the door

- because the engine is still running, the auto chime does not sound to advise you the headlights are still on (because it thinks you're still driving the car)

- arm the alarm and walk away (engine runs until turbo timer stops, headlights are still on, but door is closed by this time - so the auto chime isnt active, and meanwhile you are at a cafe enjoying a cappacino somewhere while your battery runs flat :cheers: ) :D

damn, thats gotta suck.

hrmm doesnt the r34 have auto lights off or a chim which tell ya u've left your lights on ?

Yes it does have an auto chime when the engine is not running and you open the door with either;

a) the keys still in the ignition, or

B) the parkers or headlights are on

BUT, this is a common scenario:

- you have been driving with your headlights on

- you park the car, switch off the ignition, turbo timer is still running the engine

- remove the keys and open the door

- because the engine is still running, the auto chime does not sound to advise you the headlights are still on (because it thinks you're still driving the car)

- arm the alarm and walk away (engine runs until turbo timer stops, headlights are still on, but door is closed by this time - so the auto chime isnt active, and meanwhile you are at a cafe enjoying a cappacino somewhere while your battery runs flat :cheers: ) :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • Something coarse-ish. 180 is good.
×
×
  • Create New...