Jump to content
SAU Community

Recommended Posts

AW11 and SW20 should be $900 for compliancing, that's how much we get em done for our customers in Melb. I can find the syd compliancer we use when I get into work.

Boing, call Nathan at Grey Imports in Annandale on 95195150

He has complied 2 cars for me under the 15 year rule and does an excellent job.

He specialises in 15 year old imports and one of the cars he complied for me was actually an MR2 :P

The pricing between most Sydney workshops is similar.

  • 4 weeks later...

Hey guys, I've been doing some research to get my GTR complianced, I cant go past Nathan at Grey, he seem excellent.

I had a GTS4 done at Japp Sport and Ive got to say I wasn't all that impressed especially when I saw that to space out the new seat belts they had added about 8 or 9 different sized washer between the seat belt assembly and the bracket.

Boing, call Nathan at Grey Imports in Annandale on 95195150

He has complied 2 cars for me under the 15 year rule and does an excellent job.

He specialises in 15 year old imports and one of the cars he complied for me was actually an MR2 :(

The pricing between most Sydney workshops is similar.

:werd:

Nathan is the man.

Edit: I had my aircon regassed by SSPI and they were really nice. Only heard good things about them.

Lucien.

Thanks for all your advice guys. It seems SSPI or Grey Imports are the way to go. After to speaking to Nathan at Grey Imports I think I am going to go with them, Nathan is a genuine Skyline enthusiast so at the end of the day I feel like he will do the best job. Thanks again guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Ozdavroz Not going to get a better deal than that. Cash up front and ongoing payments. 🤑
    • I wouldn't even move it like gTSBoy is saying. I'd seriously do what Duncan is saying. Unplug the injectors, and unplug the fuel pump.  Pull the spark plugs out. Have a look in quickly with a bore scope if you want. At most, you can't spray a bit of oil into the bores so there is lubricant in there while you crank it. (Don't fill it, as it's only going to enter the exhaust, or spit at you out the spark plugs holes. Before cranking the engine on the starter, after a 5 year sit I'd probably prime the oil system manually. Easiest way to do so is to look at buying an oil filter relocation block, fit it to the engine. The pressure line going into the engine on this block you can then shove into some sort of oil pump, or put it into a bottle, with that hose going to the bottom. Fill bottle up with oil. Now seal the bottle and add a compressed air line to the top of the bottle. Feed compressed air in, about 20psi will be PLENTY. This will pump oil through the motor. Be aware, it also means it will drain back to the sump, so make sure you don't end up over filling the motor Now bolt the old oil setup back on (or fully install the remote filter system).   This way you've at least pushed fresh oil everywhere, then you're letting the motor crank to then do its own oiling. Then I'd tap the key to make sure it can start to crank, if the motor free bumps, then I'd just hit the key and let it crank. After letting it crank and seeing you can get real engine oil pressure, put new spark plugs in, reconnect the fuel system electrics, and send it.   Additionally, you can look to remove the fuel feed line to the rail, and divert it to a tank so you can get the bottom of the tank shit out, and just incase there's some crud sitting anywhere that gets passed the fuel filter (or is already ahead of it).   If fuel injection at the injectors ends up appearing to be a problem, you can dump the injectors into an ultrasonic cleaner for a quick flush clean out. Note this isn't as good as new injectors, or getting them pro cleaned and flowed    
    • All I can say is, that's still bloody awesome! No plans on caging it I'm guessing?
    • It seems you'd like your Skyline to go to a great home, that can keep it as a beautiful museum piece.  I feel I can provide the perfect place for it, however, I'm not sure I can justify so much money for a Skyline that has only been crashed 3 times. Due to this and market prices, would you be against me buying it for $100.00, with $60 to be paid upfront, and the remaining $40 to be paid annually in equal payments?  
    • I did say no low balling (Insert copy and paste article from Motor mag with complete history of R32 GTR development and racing history here)
×
×
  • Create New...