Jump to content
SAU Community

Recommended Posts

sweet where's ice performance?operator couldnt find it,anyone have there number??Ive got a autometer a/f gauge but i got told not to use it for tunning cause there not that accurate.So it just another gauge next to boost,oil,water .But i must say after putting in a boost gauge it did go heaps better:D .......

or maybe it was the bleed valve that was put in with it??

nah it was the boost gauge

:lol:

You're right not to use it for tuning because they are not what they are used for. It's just an ornament, in my opinion. Greddy A/F meter comes with it's own 02 sensor which although not to professional standards, is useful as far as being able to tune the S-AFC. Set your Fuel ratio at full throttle between 11-12.1 for power and that safety edge (richer than 12.6 max power) to help prevent detonation.

Originally posted by Bo0sT_JuNkY

sweet where's ice performance?operator couldnt find it,anyone have there number??Ive got a autometer a/f gauge but i got told not to use it for tunning cause there not that accurate.So it just another gauge next to boost,oil,water .But i must say after putting in a boost gauge it did go heaps better:D .......

or maybe it was the bleed valve that was put in with it??

nah it was the boost gauge

:lol:

ice workshop number is 95127591

Hey INASNT, that isnt dyno tuned is it? I was quoted by Arnold at HyperTech and he said $365 to fit and get 2 hours on the dyno... $75 is friggen cheap. However HyperTech (formally BGT performance) have a name Australia wide as being one of the best in the best around, and are the distributors for A`Pexi...? If $75 is all its gonna cost me then i am gonna call them aswell, cos i am getting a brand new AFC for $450 and was a bit angry that it was gonna cost almost as much to have it running properly. BTW anyone who wants an AFC get onto Sub-Zero performance in QLD they have them on special fro $450 at the moment, they have none left in stock but are getting more in Feb, and i rang them today adn they will honor the special price in Feb aswell as long as ya call them and tell them about the add 'you saw' in High Performance Imports. L8ters all, J.

Originally posted by YBSLO4

Hey INASNT, that isnt dyno tuned is it? I was quoted by Arnold at HyperTech and he said $365 to fit and get 2 hours on the dyno... $75 is friggen cheap. However HyperTech (formally BGT performance) have a name Australia wide as being one of the best in the best around, and are the distributors for A`Pexi...? If $75 is all its gonna cost me then i am gonna call them aswell, cos i am getting a brand new AFC for $450 and was a bit angry that it was gonna cost almost as much to have it running properly. BTW anyone who wants an AFC get onto Sub-Zero performance in QLD they have them on special fro $450 at the moment, they have none left in stock but are getting more in Feb, and i rang them today adn they will honor the special price in Feb aswell as long as ya call them and tell them about the add 'you saw' in High Performance Imports. L8ters all, J.

I installed my s-afc with grim on our cars ourselfs! it takes about 1 hr and cost us $0. To tune the s-afc only takes about 1 hr at a max as there aint that many points of tuning u can do with it!

$365 to fit and 2 hours to tune? WTF that is out of control. It only takes about 2 hours to tune a Power FC in competent hands, and a good shop will charge about $75/hour max for labour (even though I think I would hesitate at going much over $50/hour) so $365 = 4.86 hours. Either someone doesn't want your business, or they are trying to rip you IMHO

Originally posted by skyline33

the only reason why the s-afc is cheap now is because there is a new s-afc its called the Super-AFC II, which will be released after christmas

how do you know this? When will it be available in Aust?

I'm getting an SAFC in january and if there's a new one coming out - I'll go for this!

Originally posted by skyline33

also from what he was saying is that it has more tuning points and features.

There is a new safc (third gen) being released after christmas (now) and it is selling for the same price as the second gen. safc on takakaira.

There is also a limited edition black face model.

It seems to have the ability to be tuned at 200 rpm increments (instead of 500) and a lot of other features which I have no clue of 'cos I can't read japanese - check out the apexi pdf if you can read japanese and please let me know what it means in terms of new features.

apexi news release:

http://www.apexi.co.jp/news_other/images/s...ohinsetumei.pdf

takakaira:

http://www.takakaira.com/asp/template.asp?id=815&cat=2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I should note too as I have all 4 wheel speed inputs to the emtron I now have the emtron controlling the attessa solenoid for 4wd/traction and launch control strategies. 
    • It works quite well with the adjustibility within each of the programs of the turbolamik. Essentially p1 is drive and lockup comes on like a normal driver.  But in program 7 I have customised it to not request the lockup clutch to engage until something like 6500/7 when slip was the lowest. 
    • Yep, I like that. The tags are only on the first post of a thread and we don't get huge numbers of new threads. Also, I plan to add some more report types and we could have a member report type like 'review tags' then members could flag if they thought a topic wasn't tagged correctly.  No way man, I dig the input. Thanks! 
    • It's a valid thought. There's not exactly that functionality already (when creating a thread) - that's where the OP can use/create any tag they want. We'd have to come up with a way for the user to request their tags get reviewed or something. Otherwise the mods would have to review every new post's tags (for those that have them, anyway). There's kind of that functionality already exists to some extent, post facto of starting the thread, where the OP or any other user could report the post to admins, and request that tags get reviewed. We could do this already, and any user could already have made such a request. To make it a part of the forum proper, it would require an initial and an ongoing education programme, so that people know that it's a thing. OP based tagging/request for review would also require at least some (probably most) of the user base to be told that it's a thing they can do. Both of these things probably wouldn't spread too far and/or get used very much. If it was the standard approach on a lot of different sites, then it might do, because people would be used to it. Prank's approach to this differs from my original thought, by leaning into tagging. Which is fine - it's possibly better than what I originally suggested. In fact, I just went to the R32 GTR wiring diagram thread and added tags, including "Library". That's probably a good way to use tags and the idea of a library. We just have to drag together an (organised!) index of threads or posts that have that tag. I have yet to do any of my own follow up by pursuing worthy threads and posts and reporting/marking/tagging them for the library, such as the @Sydneykid stuff I was talking about, and possibly any amount of @Lithium 's and others' posts. At least if I tag them Library, we'll have a start.   Back to @Wazmond's idea as it relates to @PranK's, we might have some sort of a list of tags that are already used to scrape for this library. I'm not entirely sure how that would be presented or used, particularly if it got long. But it's yet another idea!   cheers
    • Just a thought, but instead of restricting, is it possible to do like an "up for review" kind of thing? Where say someone who's not an admin/mod tags, it would require approval for it to actually tag? User posts with a 'tag' > Admin/Mod Reviews > Approves tag > Tag now exists kinda thing? Just came across this thread so Im not too sure if Im straying off topic or not but forgive me if i am...
×
×
  • Create New...