Jump to content
SAU Community

Recommended Posts

does anyone have any information about standard or forged pistons, I never knew if i had forgies or not so I was told to take the spark plug out and have a look to see what was on top of the piston.

there are only 2 possible things you could see and that wil tell you either if you have forgies or stock pistons,

outcome 1: you have a little blister on top of the piston which indicates that the piston was frm an injection mould which means they are stock,

outcome 2: piston has a little indentation which means the piston was spon on a lathe making it forged.

from what i can see by taking out the spark and shining a light down the hole, is a little ring the size of a 5cent piece and some writing which looks to say 05U

i have no idea what this means and havnt come to any conlusions cause of this, if anyone has any pictures of some stocky or forged pictures from top would be much appreciated....

Link to comment
https://www.sau.com.au/forums/topic/75593-rb26dett-pistons/
Share on other sites

no idea. the only reason i said that is that standard GTI-R pistons have '54C' written on them as this is nissans code for that variant of SR20, makes sense the other nissan pistons would have a similar code.

forged ones will generally not have any writing on the top of the piston.

Link to comment
https://www.sau.com.au/forums/topic/75593-rb26dett-pistons/#findComment-1387221
Share on other sites

and the 05U would be 0.5mm OS perhaps??

No....05U is part of the Nissan part number for the piston. It will be something like xxxxx-05Uxx. I believe it identifies it as an R32 GTR part.....certainly an R32 GTR flywheel has 05U cast into it, as does the standard RB26 block (N1 block has a different number). Usually the last 2 numbers after the '05U' will be different for o/size pistons.

Link to comment
https://www.sau.com.au/forums/topic/75593-rb26dett-pistons/#findComment-1387607
Share on other sites

No....05U is part of the Nissan part number for the piston.  It will be something like xxxxx-05Uxx.   I believe it identifies it as an R32 GTR part.....certainly an R32 GTR flywheel has 05U cast into it, as does the standard RB26 block (N1 block has a different number).   Usually the last 2 numbers after the '05U' will be different for o/size pistons.

yup "05U" appears on alot of R32 GTR part numbers :)

Link to comment
https://www.sau.com.au/forums/topic/75593-rb26dett-pistons/#findComment-1387706
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • https://www.youtube.com/watch?v=KyZDvZmvhik
    • You'd be better off digging a pit and standing under it to shoot it.
    • The easiest way would to be ignore the oscilloscope, grab a multimeter, and make sure all the main connections are right. An oscilloscope will give 99.9% of even technicians so much grief, as they have no idea what things should even look like on an oscilloscope. Which is also even more likely for someone who's first ever major work on a car is this If the battery volts are dropping down so low, the LDV will reboot the ECU, when it does so, it will drop out the start circuit. If this is occuring, the battery voltage should also come back up. Give it a few tests, even simple ones like when you're attempting to crank it, measure voltage from the engine block, to the negative terminal. You might find you've got really bad connections somewhere. My guess is the "new" motor has something like a shit starter motor, at which point, you can swap the starter motor from the old motor, to the new motor. Before I did any of the above though, I'd 100% confirm the battery in the vehicle. Most jumper packs are absolutely useless, especially if a battery has a bad cell for example. Also the new modern "jump packs" if you don't know what you're doing with them, you won't even get them into high current stage. So go back to basics, check the battery, especially with a known good one as a replacement test. Check ALL the wiring, this includes where they're bolted onto the battery, and bolted onto the starter motor. Check all the earth straps are on. Measure your resistances across your earth straps. A good check here is to measure voltage across the earth straps while you're trying to crank it. If you're seeing voltage, you've got high resistance joints! Oh, and once you've done the above, check the battery over again.
    • For most rotisseries, as Duncan has mentioned, you really don't want a full car on it, you want a stripped shell. And imagine how many more weeks THAT is going to add to working on the car...
×
×
  • Create New...