Jump to content
SAU Community

Recommended Posts

Hi everyone

I got my new car yesterday and i noticed a couple of times when idling it will just start adling up and down without anything being touched after a while and sometimes it will sit at around 800rpm steadily and then sometimes around 5/600. Is something wrong? or do they just have dodgy idle sensors or something cause my last 1996 series 2 gts-t didnt do it but this is a 1995 gts-t

Link to comment
https://www.sau.com.au/forums/topic/75777-upand-down-idling-s/
Share on other sites

Usually, a problem in the TPS is a constant high (around 1500 - 2000 rpm) idle. Usually caused by the sensor getting out of alignment and not sending the "throttle closed" signal to the ECU.

Variable idle is usually caused by a dirty / sticking AAC valve. That's the little cylinder on the back of the plenum chamber. It can be removed, disassembled and cleaned out with a bit of Car-B-Clean, then re-assembled and re-fitted without too much drama.

could be a vacume leak,

blind elk, thats true however my tps was out of wack in the other direction, what would happen, is it would idle fine, but you woul pull up to a stop sign, dip the clutch and the idle would **** around for a few seconds, worth checking, also the

and low speed driving was a bitch, car runs like crap, i dont think it will see 100% throttle either when you nail it

if your going to adjust idle , disconnect the brown plug on the solinoid behind it when your finished, reconnect it

Just had my 33 serviced not even a month ago, and after 3 mnths of pretty crappy idling, apparently a vacuum leak near idle starter motor was fixed, afm cleaned, tps adjusted, and timing reset.

Just last week it started ranging again from like 200-1200 rpm up and down as if i was stepping on and off the accelerator...

I have a non-oil blitz pod filter, and a blitz 3inch exhaust.

Any ideas on what else could be causing it in my particular case would be appreciated.

Cheers

-Serge

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • G'day all, I have drilled and tapped the hole for the relocation of the timing belt tensioner. That was straight forward. I'm unsure if I need to also put another hole for the smaller stud that the spring behind the tensioner catches on (this is how it seems to work in its original spot). Or do you not use the spring behind it and just torque it down? Thanks in advance, I did a search but couldn't find anything related and it doesn't mention it in the rb30det sau guide.
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much 
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much   
    • 😜 hopefully we get this instead of a new R36 GTR due to recent financial problems at Nissan. Nismo to sell a complete kit with RB26 and driveline. All starts making sense (ok maybe not) once the Nissan Leaf's (Leaves?) with stuffed EV motors/batteries hit the market cheap
    • Hi guys , have had allot of time for SAU and has helped me out heaps in the past so I thought I would give it a go , I have my QM1 white NUR for sale 1 of 156 examples built by Nissan. Serious personal messages please if interested and details will be provided , asking 500k 
×
×
  • Create New...