R32 GTSt manual conversion

[B0oStEr]

Edited 5/10/05

I need an R33 box with yoke as the one I ordered and paid for never arrived

Also require clutch lines to finish the job.

[WHITE R32]

i have everything you need other than the gearbox flywheel and clutch and tailshaft.... i have pedalbox lines clutch master the whole lot for $200

[B0oStEr]

Even when I find a box it's all the little things you need that make this difficult.

Not having been through this with a Skyline before I can only guess what is required.

My list so far if anyone cares to comment.

Gearbox/ bellhousing bolts/ g/b crossmember/ mount/ brackets?/ coverplate?/ clutchfork/ release bearing/ nuts and bolts etc.

Flywheel/ flywheel bolts/ spigot bearing/ pressureplate and bolts/ clutchplate/ slave cyl. and bolts/hyd. lines/ master cyl./ pedalbox with nuts and bolts.

Gearstick boot and surround/ gearknob/ instrument cluster surround.

Speedo cable/ loom for reverse light switch, inhibitor switch bypass, gearstick position sensors.

Manual ECU

Tailshaft

Starter motor?

Anything else I've overlooked or maybe something I've listed is unnecessary.

Anyway let me know if you have any of these bits for sale.

Thankyou.

[CR@ZYM@X!!!]

have most of em edd 0419204275

[B0oStEr]

I could pick up from Bris. or GoldCoast.

[WHITE R32]

i have the parts i have listed here in toowoomba about 1 hr from brissy like i say $200 cash for everything i have here....

[B0oStEr]

i have the parts i have listed here in toowoomba about 1 hr from brissy like i say $200 cash for everything i have here....

Considering the need for every nut and bolt I think my best bet is a half cut.

I'm keeping your parts in mind in case someone offers me a package minus the bits you have.

I don't want to rush out and buy all the main bits and then find I still need dozens of small bits of little value that noone could be bothered looking for.

[WHITE R32]

its all still in the halfcut man so u can get whatever nuts and bolts u need to go with it just the motor and box have been removed...

[r32sedan]

WHITE R32: Will you be will ing to send to Melbourne and for how much?

[geordie]

some one posted that they got quoted 2k to do a full manual conversion on a r33, if you know much about r33 the boxes arent cheap, so thats really really good price, i wouold sugest going and finding that thread (it was only a few days ago) and i tihnk it was in brissy to. For 2k fully converted, using the stronger rb25 box, id go for it

[WHITE R32]

nick i only have a few parts mainly missing the major mechanical parts yeah ill send to melb for the 200 plus freight i spose... pm me or somethin....

[B0oStEr]

Yeah, geordie, I saw that thread but I think it ended up costing him 2,500 plus.

WHITE R32 If I find the other bits I'll get back to you. Thanks

[B0oStEr]

Still looking for a complete deal.

[B0oStEr]

I still need all the bits in post#3 or a halfcut.

Preferably from Brisbane Gold Coast area.

If you have some of the bits let me know what you've got.

[boj01]

If you can buy all the bigger items, all the smaller nuts and bolts should be able to be bought from Nissan. Expect to pay around $1200 for a complete kit with most nuts and bolts.

P.S you need to add a manual dash instrument cluster to your list of goodies

[predator]

think you could be waiting a while.. there really aren't that many parts you need you know..

and bolts and nuts aren't hard to come by.. car ones aren't that special.

[predator]

you're going to be bumping forever as you're not going to find a complete set anytime soon.. its easier / cheaper to pick up the individual parts as I have had to do.. whats a few bolts anyhow?

[B0oStEr]

I still need all the bits in post#3 or a halfcut.

Preferably from Brisbane Gold Coast area.

If you have some of the bits let me know what you've got.

As I said "let me know what you've got."

[B0oStEr]

Ok, I've got an R33 g/box coming.

I need R33 slave cylinder and R32 gtr speedo drive in addition to most of the parts listed in post #3.

I no longer require driveshaft, starter motor, ecu, gearknob or speedo cable.

Let me know what you've got.

[Ghostrider]

I have an R33 GTS25t 5 speed complete. Came out of a car with just 80000k on it it and it's yours for $1100.00. I can also supply an RB20DET box from a R32 GTSt for $400.00.

I have a billet STEEL flywheel and VL Turbo clutch plate all brand new.

Contact me by PM or [email protected]

IF your still interested.

Cheers,

Dennis