Jump to content
SAU Community

Recommended Posts

hi all,

i have an auto '89 r32 gtst, just recently off the boat.

i'm finding that when i give it some stick, the revs drop off, then surge again, then drop off, then surge etc etc. eventually the car conks out and i have to restart.

if i'm just driving normally, it appears ok...any ideas what this could be?

any help at all would be great...

sig.

Link to comment
https://www.sau.com.au/forums/topic/75903-revs-drop-off-help/
Share on other sites

haha sounds exactly like what i had...very very annoying, mine was intermittent too then got worse and worse. turns out it was the AFM (airflow metre). you can find it just after the airbox/pod on the intake pipe. i just got contact cleaner and sprayed the crap out of the element and plugs.

however from what ive read, some of the AFM's are brittle on the inside where the circuit board has to bridge out to the plug and causes problems. if the contact cleaner dont work then either get a new AFM or cut open the existing AFM clean up the contacts on the board and reseal the metre with silicon.

good luck mate. i feel your pain. could be something else too, but AFM is what i would look at first, cause it only takes 20-30 mins

hey thanks heaps flagger - yeah it's ticking me off big time. i'll grab some contact cleaner and give it a go - i guess you remove the airbox, do you then remove the actual afm or just spray down into the guts of it through the metal filter? guessing i have to remove the whole device...

  • 2 weeks later...

hey when your car surges and then eventually turns off.. do u get alot of smoke blowing out of exhaust?. and surges to pretty much 0rpm then back to liek 1000rpm and back and forth?.. i cleaned my afm 2 days ago fixed the problem but its back :( but it doesnt happen all the time?...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As long as its NOT a HyperSHITtune, youll be fine.
    • First time visitor and currently getting ready to start work on my HK Premier.  Its all stock, 186 with 3 on the tree.  The only mod i have right now is extractors.  I am hoping to get some guidance on slightly modifying the engine to bring a little more power. Just going for a nice, comfortable cruiser.  The car is very straight, however i have been out of the country for 20 years and its been gathering dust at a family farm.  Will be doing quite a bit of body work to cut out some small rust areas (frnt quarter panels and a few other small bits) and fix up the paint.  Will be redoing the interior (its currently black and the seats are in real need of recovering and respringing the driver side (its front bench seat).  The dash needs a little TLC, but no real damage.  As my heater has degraded I am considering fitting something after-market that will be both heater/AC (recommendations here are always welcome). Wanting something discrete that will allow me to use the same controls and not be obvious once inside the car.   For the engine, i have been told i could consider upgrading my cam (imagine i would need a new head as well) and putting a new carby (currently the original stromberg).  However not sure what is going to be the best route.  Would certainly welcome any comments/suggestions.  As  a final step I am looking at changing the wheels. Current hubcaps are in dire need of refurbishment or replacement (imagine its a bit like hens teeth).  Thinking of some clean/classic looking mags (7-inch should be more than enough - not going for a large change in look).  Welcome any comments/advice and of course any questions. 
    • I got the ARC M079 due to the space constraint.  Been running mint for the last 3 years.  Plazmaman also seems like a really solid choice but not used myself.    Hunt around for a better price but this is what I have - https://www.rhdjapan.com/arc-brazing-intercooler-smic-m079-bnr32.html
    • Wanted to follow up on this. Did you end up getting the M073? Still deciding on what to get between nismo m073-79 and plazaman.  
    • I was just watching these boys up in QLD AWD'ing their S13 too.  
×
×
  • Create New...