Jump to content
SAU Community

Recommended Posts

hi all,

i have an auto '89 r32 gtst, just recently off the boat.

i'm finding that when i give it some stick, the revs drop off, then surge again, then drop off, then surge etc etc. eventually the car conks out and i have to restart.

if i'm just driving normally, it appears ok...any ideas what this could be?

any help at all would be great...

sig.

Link to comment
https://www.sau.com.au/forums/topic/75903-revs-drop-off-help/
Share on other sites

haha sounds exactly like what i had...very very annoying, mine was intermittent too then got worse and worse. turns out it was the AFM (airflow metre). you can find it just after the airbox/pod on the intake pipe. i just got contact cleaner and sprayed the crap out of the element and plugs.

however from what ive read, some of the AFM's are brittle on the inside where the circuit board has to bridge out to the plug and causes problems. if the contact cleaner dont work then either get a new AFM or cut open the existing AFM clean up the contacts on the board and reseal the metre with silicon.

good luck mate. i feel your pain. could be something else too, but AFM is what i would look at first, cause it only takes 20-30 mins

hey thanks heaps flagger - yeah it's ticking me off big time. i'll grab some contact cleaner and give it a go - i guess you remove the airbox, do you then remove the actual afm or just spray down into the guts of it through the metal filter? guessing i have to remove the whole device...

  • 2 weeks later...

hey when your car surges and then eventually turns off.. do u get alot of smoke blowing out of exhaust?. and surges to pretty much 0rpm then back to liek 1000rpm and back and forth?.. i cleaned my afm 2 days ago fixed the problem but its back :( but it doesnt happen all the time?...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey everyone!!  I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings. It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L) My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick?  I've checked images of some of the genuine dipsticks, but none of them have the length in it. https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him. Thanks in advance 🙏🏾 
    • Sport. I didn’t rebleed it cause I just removed the slave and left connected.    I will change line and slave and see how it goes.  
    • Oh and how is the rattle when foot is on the clutch ?
    • Did you get the sport or track ? From what the documentation says the uniclutch has a small amount of movement to disengage.  So your story of tricky pedal setup seems common.    Hopefully you got it bled up too, as the bite point moving around is usually either plates wearing in or air in the line.     
    • There's always "MIG it up and grind it back".
×
×
  • Create New...