Jump to content
SAU Community

Recommended Posts

I've been following this issue on my R32 for sometime now ever since I first got it.

Basically the HICAS light comes on after I travel a certain distance. It has made me wonder because it doesn't come on after a certain period of time but a certain distance everytime after first travelling in my car. Leave it to rest for a while and it resets itself and the same thing will happen again. Also I have no clue about HICAS diagnostics either.

One thing I have found though, is that my HICAS never actually seems to work. And I've never actually had the 4WS kick in on me before. But the thing is that I don't have a locker bar because all the lines still connect into the rear steering rack and there doesn't seem to be any tampering with the HICAS ecu at all.

Is there any dodge way of eliminating the HICAS? Removing fuses? Cutting/crossing wires? Also people with the lock bars, does the HICAS light come on at all times or something similar to my case that after it travels a certain distance the light will come on?

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/75923-timed-out-hicas-issue/
Share on other sites

Scott, it would appear that your steering wheel is not centred (I'm guessing an aftermarket wheel) so the HICAS goes into disabled mode after about 6-7km. There is a sensor in the steering wheel to tell the HICAS where it is pointing and if it is not centred/doesn't move when driving it shuts down HICAS.

For more info on HICAS go to the tutorial in my sig.

well my boss kit is the right opne it fits straight on,.,,.. i think its the steering wheel isnt dead centre problem and i need an alignment... so if i just adjust my wheel so its perfect straight this will fidx it>??? i still dont see how just taking the steering wheel off affects the sensor.. damn nissan

I too have the same problem, but not after any set time or distance.

I asked a mechanic who also owns a 32 and he put it down to a dodgy solonoid or to that effect. It started happening to me after about 3 weeks from purchase, since then I have changed my after market wheel twice. Made no diff, will follow this thread with interest, wiered.. :confused:

I too have the same problem, but not after any set time or distance.

I asked a mechanic who also owns a 32 and he put it down to a dodgy solonoid or to that effect. It started happening to me after about 3 weeks from purchase, since then I have changed my after market wheel twice. Made no diff, will follow this thread with interest, wiered.. :confused:

I too have the same problem, but not after any set time or distance.

I asked a mechanic who also owns a 32 and he put it down to a dodgy solonoid or to that effect. It started happening to me after about 3 weeks from purchase, since then I have changed my after market wheel twice. Made no diff, will follow this thread with interest, wiered.. :confused:

I too have the same problem, but not after any set time or distance. My handbrake light does the same. Neither everyday, nor at the same time, just every so often. Before you ask, yes my h/brake is all the way down.

I asked a mechanic who also owns a 32 and he put it down to a dodgy solonoid or to that effect. It started happening to me after about 3 weeks from purchase, since then I have changed my after market wheel twice. Made no diff, will follow this thread with interest, wiered..

:confused:

you can disable the HICAS by unplugging the KYB motor located in front of the rear steering rack. I would advise against it as it makes steering much heavier. You will know if the 4WS has been working or not because of the difference it will make once you unplug it. The light may stay on constantly though, can't remember.

The problem has been covered a hunred times :cheers:

Your problem is likely to be:

a) A lack of powersteering fluid.

B) An incorrect boss kit.

c) An incorrectly fitted boss kit.

Just because the boss fits, doesn't mean its the correct one. You need a boss with holes for the HICAS lugs offset at about 2AM and 8PM: see this tread:

http://www.skylinesaustralia.com/forums/sh...&highlight=boss

I also had an issue with the piping on the powersteering resevoir coming loose. I pulled the hoses up as high as possible (which was bloody hard) and then replaced the standard clamps with ring clamps.

Lucien.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah yes, but the part in my hand was actually painted and fitted by me! I knew any front lip was likely to be sacrificial but I've had to fix it twice already... by the time I buy a fibreglass fixing kit, sort out sandpaper blocks, buy some fibreglass filler, body bog, spend the time and effort for a 'Greg' result... a new one being $290 seems like it's the better way to go and spray that with bedliner/raptor coat and we're all pretty again.. Would have preferred it last more than a month though. Them's the breaks I suppose.
    • I find it funny that the USA is finding out all this really really weird stuff, and people from the USA are coming here treating it like gospel, yet, all the info on solving those issues is here on these forums for the last 15 odd years... Also, I know how much heat it takes to ignite the hood lining of an R33 skyline. I worked it out myself... It also took a LOT of time, and heat for it to do it... Big single, and I needed to drive the car, so retarded the timing off to "protect it". Yeah, that was a bad move for cruising on a freeway with only 15 degrees of timing on it. That was a lesson I learned around 2009. So that's over 15 odd years ago. Aligning water and oil, that's identical for any turbo engine, it's not Japanese specific. If a shop doesn't know how to make sure the core is rotated the right way, then they shouldn't be touching any turbo engine. That's not a matter of "We haven't had Skylines for that long here"...
    • Sounds like it is rotational in the driveline. CV? Tailshaft CB? Also.....didn't you just pay to have that bit painted and put on the car?
    • Yeah, when I dialled my idle down, given how much time I spent idling at the lights in traffic on my daily commute, the effect on overall fuel consumption was absolutely noticeable.
    • Emissions, fuel consumption, heat, noise, etc. most likely.
×
×
  • Create New...