Bolt on upgrade turbos R32 gtr

[Michael Goldspink]

Hi,

> Can some one please tell me what Garrett turbos I can use to upgrade my 1993

> R32 Nissan skyline GTR Twin turbo that are a direct bolt on fit?. I

> think the car has T28 standard bushed turbos.

> I would prefer turbos with ballbearings flowing 300+ hp each and capable

> of handling 1.2-1.4 bar.

> I have been told from a local mechanic in A.C.T that a garrett GT28r and the

> GT28rs (disco potato) will fit and bolt directly on.

> I have also been told from another mechanic that the GT28r and rs wont

> bolt directly on to a standard skyline and will need certain things

changed but a hks g2530 will bolt straight on.

> Is there a t28 Ball bearing turbo direct fit made?

My engine has just been fully rebuilt with forged pistons , shot peened rods with heavy duty rodbolts and ported and flowed head with the rest of the internals being stock but new.

> I appreciate your time and help.

[Sinista32]

N1's - 2530's

Now hand your engine over :uzi:

:kewl: Jokes

[oscar32]

Barneys GTR has N1's and not a lot else and goes great.

No lag, full steel and with the right setup are able to make 600 ps in Japan.

All yours for the bolt in price of $3000ish for R34 N1's

[Sinista32]

My R34 N1's on stock stock internals measured 288rwkws on the Dyno (although not well tuned was not a bad result). I think youd be pressed to get over 320kw's tho

[Stevie]

Rich you have to rebuild that car! 288rwkw untuned??? DAMN... :uh-huh: :uh-huh: :uh-huh: :uh-huh:

[Sinista32]

PS Michael - 2530's are rated at 320hp each and should be good between 1.5 to 2 bar.

[Michael Goldspink]

PS Michael - 2530's are rated at 320hp each and should be good between 1.5 to 2 bar.

Sorry for the late reply, I ended up buying a set of Garrett GT2560R Ball bearings turbos as these will bolt straight on and fall in my budget range of $3000.

I have been told by a garrett dealer that these will bolt straight on and flow up to 400 HP each at 1 bar and have a steel exhaust wheel. They are cabable of 1.8 bar max.

I could not get a set of HKS 2530's or N1 's in that price range, equal to the same performance as the GT2560R..

The turbos that were pulled of the car Seemed to be a Garrett T28 ball bearing hybrid turbo. These are in as good as new condition with zero end play and are for sale if you know of anyone interested. (they have been inspected by a mechanic and I was told they barley have done I000-3000 km). they have a ceramic exhaust wheel and are only cabable of handling 300HP at 1 bar max. hence the reason I am up grading to the GT2560R.

I have been told by the engine builder that the car should produce 400 + RWK with the addition of a power Fc, boost controller, 550 injectors, high pressure fuel pump and bigger intercooler

Thanks for the help

.

[R32 TT]

Sorry for the late reply, I ended up buying a set of Garrett GT2560R Ball bearings turbos as these will bolt straight on and fall in my budget range of $3000.

I have been told by a garrett dealer that these will bolt straight on and flow up to 400 HP each at 1 bar and have a steel exhaust wheel. They are cabable of 1.8 bar max.

I could not get a set of HKS 2530's or N1 's in that price range, equal to the same performance as the GT2560R..

The turbos that were pulled of the car Seemed to be a Garrett T28 ball bearing hybrid turbo. These are in as good as new condition with zero end play and are for sale if you know of anyone interested. (they have been inspected by a mechanic and I was told they barley have done I000-3000 km). they have a ceramic exhaust wheel and are only cabable of handling 300HP at 1 bar max. hence the reason I am up grading to the GT2560R.

I have been told by the engine builder that the car should produce 400 + RWK with the addition of a power Fc, boost controller, 550 injectors, high pressure fuel pump and bigger intercooler

Thanks for the help

.

Hey Mike, I am going through exactly the same process.

Am thinking about GT-SS or the GT2560r like you.

I understand that the GT2560r more or less IS the N1 turbo and I have also heard that the GT2560r IS the GT28RS (disco potato), Garrett implemented a new naming scheme apparently.

anyhow, back on subject. How did it go? Do you have them fitted? And most importantly what is their response like?

I am after quick spool up and hence I am looking at the GT-SS also.

Matt.

[djhatton]

mmm! very interested to see how they perform! who's your mechanic??

d

[GeeTR]

Veeery interested,

Cough up GoldSpank!

- M