Jump to content
SAU Community

Recommended Posts

Hi guys,

Im still looking at a possible solution to my turbo surging problem when i use my boost controller. So far i have the possibilities of spark plugs being rooted and boost controller duty cycle solenoid on max. Ill be checking the plugs this weekend however i have another theory.........

I have noticed recently that it could stem from my fuel pump. Now my fuel pump constantly makes a straining like noise to which my mate told me that he thought the pump was an aftermarket one, however im not too sure as the car is an import and there was no record of sach a mod. Could this noise be a sign that the pump is shagged and that as soon as i try higher boost it cant supply enough fuel?

Any help would be appreciated!

Laine

I suspect you will find it is a problem of the combination of turbos and controller. It is likely that the turbos cannot work efficiently when pumping as much boost as you are pumping (you haven't stated the boost your controller is permitting).

Try dropping the boost back a bit and see what happens.

As for the "straining" of the pump, have you changed the fuel filter recently?

Yeh sorry forgot to mention that i had posed this question in a previous post. The controller is causing problems at all levels of boost including the lowest setting of 0.8 kg/cm^3.

I also had the car fully serviced about 5 months ago but there may be a need to change the fuel filter again.

Regards

Laine

  • 2 weeks later...

Hey dude, did you end up fixing this?

My 32 is doing the same thing since I boosted it, only to 11PSI and its surging sometimes but not others..... Fuel pump access panel looks untouched so I think its the stocker in there still.

Anyone wanna help out? much appreciated

Doubt its fuel pump.. unless you have a wiring problem.

As mine went dodgy recently, you'll probably find its more likely just to cut out, or drop the pressure, not "spurt" more pressure into the system. It may be possible, but from my understanding I don't think that would be the problem.

Anyhow, your fuel regulator should stop any excess pressure getting to the injectors. It may be possible that is more likely to be the culprit. If that is gone, it may not be providing consistent rail pressure. Or likewise, blocked or dodgy injectors.

With the RB30 mine makes all its boost easily under 2000rpm if its loaded up.

Under 2000rpm I've noticed the car goes really flat then once over 2000rpm it's like a switch and clears up.

Watching the PFC hand controller's O2 sensor voltage I've noticed during this time of possible surge its reading maximum lean. If I hold my foot in to it she begins to missfire and pop a little. I suspect this is what they call a lean missfire???

Unsure really. I wouldn't put it past the stock turbo on the r32 to surge at such low rpms but the lean o2 sensor reading is a concern.

I'll have to get it on the dyno and check it out. I have had the Bosch 910 pump in since I bought the car 3yrs+ ago so I wouldn't be suprised if that is on its way out as 100% duty cycle only makes 176rwkw at a low ish rpm. I was under the impression the RB20DET injectors with a good fuel pump max'd out around 190rwkw or so and that is at a higher rpm where the injectors don't have as much time to push fuel in.

coils, or fuel filter just change the filter there only $10 or pull it off and tip it up the wrong way on to your hand and check what comes out if there is heaps of stuff then it blocked

Took mine out tonight, went fine, no surging or anything? Weird.... I thought this sorta problem was normally fuel pump related particularly in an 89 model....

Is it worth getting a new pump for piece of mind.? I'd hate to skimp on this and then having to rebuild the motor due to it leaning out......

Spend $35-$50 on a dyno power run for piece of mind.

All my fuel filters etc have been replaced. I will check the pumps sock tomorrow i think. :thumbsup:

Its still running the stock internal pump with an external bosch so no doubt as I run it to the red every tank it will have picked up crap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The NZ wiring kit is a 1/3 the price and will be perfectly fine for your application, I've ran one for 6+ years and many others have. Comes as a full plug into factory connector and the settings for a Link. https://www.nzwiring.com/index.php/product/trigger-kit/ Always comes back to the tuners knowledge and experience with a tuning platform. It takes years to become proficient and learning all aspects and capabilities. I've been using Links for 16 years now (rb and sr paltforms) and always learning something new with adding tables, diagnostics and data logging. Stay 98 for the usability and keep it simple so you can enjoy the car more. With experience I'll give you a current example of the industry I am in. They use Motec m190 and only use VE tuning when they have a torque mapping available and would solve the "PARITY" issues that plagues the category all because the muppet doing the tuning doesn't understand the platform or want to learn it and the product seller have no idea on its full capabilities ( I had a good laugh as when firing up an older car that just got completed and they didn't understand the injector scaling or how to change it for different fuel being used)  
    • I'm sure there are specific hygrometers for it. But if you can just throw a high enough ranged temp sensor (theromcouple that came with your DMM, for example) into a pot of it on the BBQ, you can see when it boils.
    • I have multiple bottles in a shed that gets hot, and I'm in SEQ, so it's humid. Maybe we test their theory... Anyone have a system to accurately measure moisture content in oil?
    • Yeah, that and throwing away opened, part used, closed back up bottles has got to be bullshit. Brake fluid sits in not-very-well sealed master cylinder reservoirs for literal years and keeps working (albeit we know we should flush it every couple of years - it actually still works). Anything kept in a bottle in the shed with a tightly capped lid has got to be a million times better than what has been in the car for the same length of time.
    • Wait, they're claiming UNOPENED fluid has a shelf life of only 18 months?
×
×
  • Create New...