Jump to content
SAU Community

Recommended Posts

Complete kit, consisting of:

HKS highmount manifolds

Twin HKS wastegates

Two Garrett 3037S spec turbos - HKS 0.73 A/R rear housings

Exhaust pipes to cat

Piping from turbo to intercooler

Was planning to use this *when* my motor was built, but due to unforeseen circumstances this is being abandoned. Everything is in perfect condition, turbos are brand new still in their boxes. Was bought as a HKS 2835R kit and upgraded the turbos on it. Still have the 2835R's if interested in them.

$8500 ono

Also 4 layer Trust intercooler, 600x300x135mm will sell with the turbo kit for $1500

Tons of other parts, 280 + 290 cams, 1000cc injectors, Cusco front diff, etc etc. that would suit such a buildup.

Edit: 29/8 - parts are all sold!

Link to comment
https://www.sau.com.au/forums/topic/76226-hksgarrett-twin-3037s-spec-kit-rb26/
Share on other sites

They are packaged in Blitz boxes, made by Denso (as they all seem to be). $1000 for the injectors.

Edit: Just took one out of it's box for photo - the others have never been opened.

Injectors are sold. Asking $2,000 for the intercooler seperate from the turbo kit. Located in Sydney. Workshop was closed over long weekend, so was unable to do much about it.

JUN plenum might be available in the near future, the person who has it is reconsidering the direction their project is headed. Will post up if it's for sale, but until then not much I can do :D

god ****ing damn if only i had 8000 spare i'd offer that for the complete twin kit

but well yer just spent about that much of a 26 for the silvia : they'd be insane in a little silvia ;)

good luck to who ever buy's this insane turbo setup

  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That’s a beautiful setup Tao, Have u done any development with the new Turbosmart 40mm electronic straight gate, especially in this G30 configuration?
    • Let's hope that's not a copy pump either. There were so many copies of them back in the day.
    • Damn it, I was at work last night, and stayed in a room there during the storm with the car outside, but undercover, I just went downstairs and well....there was a large steel locker that has come from some place last night, it wasn't anywhere I could see yesterday, and yeap, it landed on the fraking car....of course it did..... LOL So, I'll need to take it back for paint and panel, luckily it was only the boot that took the hit, so it could have been worse Serves me right for staying at work and getting on the cans with some of the boys
    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
×
×
  • Create New...