Jump to content
SAU Community

Recommended Posts

Hi,

Ive got a manual 34 with turbo back 3" exhaust, apexi pod, hks bov, avcr (0.7 bar) and power fc. The mods were fitted in this order first exhaust > pod > avcr > pfc.

After I had the Power FC tuned I was slightly dissapointed with the 'increase' in power (it was tuned on the road, not a dyno by chapman & chapman). Since then I haven't been too worried about it as the car is running perfectly, and the tuner had ironed out a 'miss' I had on idle and some backfiring between gears caused by the atmo bov. It was only today that I realised my car is hardly any quicker than a standard manual sedan (judging purely by 'feel').

Just now i swapped back to my standard computer and it doesn't really feel hardly any slower..... I am going to run it on a dyno -

My question is how much power (at least) should I expect?

Dan666 was also in my car and agreed it should be a lot quicker......

Any ideas??

Cheers, Paul

Link to comment
https://www.sau.com.au/forums/topic/76608-r34-performance-issues-with-pfc/
Share on other sites

Hmmm - cheers bass i'll see how I go.

By the way I ran 13.9 @ 101mph with 2.21 60 foot - That was a 3500 launch (obviosuly not dropping the clutch) and it was on 19" chromes with 235's. Also remember its a sedan... Bass - how did you get a 1.9 60 foot?

I was quite happy with this time - although shoudl i expect more? I think the sedan is at least 150kg heavier than the coupe?

Your missing a fmic.......

I went through the same thing in my car......I got the PFC by necessity as my afm stuffed up and I decided to get a z32 and pfc while I was at it.

I had pretty much the same mods, exhaust, pod, blitz ID3, z32 and pfc.

Have to admit the pfc DID make a little bit of difference but not as much as I expected, but once the front mount was installed and the pfc had a bit more room to do its magic it made a HUGE difference.

Admittedly the dyno is a bit of a happy dyno...but the difference the fmic should be legit as it was done on the same dyno...

I ended up going from 183rwkw before fmic to 220rwkw after fmic.

  • 2 weeks later...

I got a front mount installed a few days ago. The car is alot quicker all the way through the revs. I can't belive it actually seems to have less boost lag - theres alot more response all the way through the revs. It actually felt 'doughy' before, now it feels almost like 2 people have got out of the car. It hasn't been retuned yet, i'm not sure how much would have to be adjusted with just the addition of an intercooler... it will be done this week some time.

I've driven a fair few cars (mainly 32's and 33's) with bigger front mounts and the same mods as mine minus the computer and really have felt hardly quicker than cars with stock coolers... maybe r34's with better breathing on the intake and exhaust and tighter a/f ratios really put alot more pressure on the stock cooler??

Either way i'm happy :P I'll get a dyno readout in a while and let you know - i'd be happy with anything over 190kw...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...