Replacing cannon with stock muffler or something less "how's your father"

[Rolls]

Basically Ive got an R31 GT Passage with an rb20det and a full 3 inch system with a wanky cannon, now I like the noise etc but the massive shiny 4inch tip looks rediculous.

Now Basically I want to know would it choke the system much putting an original 1.5-2inch muffler on it, or are there anyways of basically making it less obvious that you guys have done.

Cheers

[r34_skyline]

replace the muffler with a twin tip(of the same intake) ? thats the best way to go about it if you're worried about looks.

[rsx84]

if you speck to people with 4" cannons that have silencers they will tell you there is a power difference having the restrictive silencer in place, i'd say the 1 1/2"-2" standard final muffler would have the same effect. twin 2" pipes are the way to go as some of these mufflers you can get look very nice and stock...

[warps]

Yes, replace the muffler with something decent flowing such as the Lukey LR2779. This is a straight through 2.5", which is still reasonably quiet (as long as you have resonators). You can then put a 2" tailpipe on the end, and not lose a hell of a lot of flow.

Remember, by the time the gases reach the tailpipe, they have cooled a lot, and hence contracted. I'd be surprised if this loses you any power at all.

Then you can sell the cannon to some riceboy on Ebay, and have enough to pay for the Lukey.