Jump to content
SAU Community

Recommended Posts

Hi all, just asking for people's opinions.....

The car has lost top end power like a mofo, feels like its not even going anywhere after like 4500-5000rpm.

There is a little oil in the intake manifold soemhow and its leaking out into the engine bay....i have taken off the intercooler piping to find a little oil inside there too....iam seriously clueless what the go is......i take off the blow off value...and there's a little oil in there....i take off the manafold....there's a little oil in the throttle body.....

oil pressure is fine, i check the oil 3 times a day and its going fine....just losing it into the bay/intake.....

have been told by a few people its called 'blow by' and could be the rings.....one other mate reckons it doesnt have all the symptoms of fried rings and its the turbo which is rooted......

i might as well mention i have had the stock s1 r33 gts-t turbo at 15 psi a couple of times for a few drags.....my bad

any of you smarties on here have any ideas?

Link to comment
https://www.sau.com.au/forums/topic/76850-me-thinks-turbo-go-bye-bye/
Share on other sites

Are you still making the same boost through the  rev range

the boost gauge tells me i am but it has a bit of a splutter and it sure as hell doesnt feel like 10psi used to.....even a commodore cold prob beat me now....

after a little while when i'd give it full stick on full boost it would feel like its going nowhere. I little extra black exhuast fairy dust on my back bumper too.

Its booked into gavin woods workshop here tomorrow so hopefuly its nothing really major....i dont mind if its the turbo, good excuse to upgrade.....i just want to know how its leaking oil into the intake pipes/manifold.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...