Jump to content
SAU Community

Recommended Posts

What are the differences between a R34 GTR M-Spec and V-spec? What is different from a V-Spec to a V-spec II, what did they change? Is the only difference from a plain jane R34 GTR to a Vspec the suspension and the diff like the R33 GTR?

Can anyone confirm what Nür means, I assume it has something to do with nurburgring, and i read somewhere that you get N1 engine and turbos.

I've never really take an interest in R34s until recently, and was wondering why a plain R34 GTR goes for like 65 grand when, I recently found a R34 GTR Vspec II Nür forsale in japan and it was going to cost like 130 grand by the time it got here and was complied.

V-Spec:

Brake cooling air guide

Front diffuser and rear carbon diffuser

Active LSD and ATTESA-ETS Pro

Harder suspension

Updated tachometer

V-Spec II:

Same extras as V-Spec but based on the "series 2" BNR34 which included

N1 rear calipers on whole GTR range

Aluminium pedals on whole GTR range

Revised interior colour scheme (series 1 grey cloth, series 2 black cloth) on whole GTR range

Revised centre console colour scheme (series 1 gold, series 2 illidium)on whole GTR range

Clear front and side indicators on whole GTR range

Carbon fibre bonnet with NACA duct on V-Spec II

M-Spec:

Based on V-Spec II

Leather interior

Front seat heaters

Special ripple control shock absorber

Special rear stabiliser bar

Fine grip type steering wheel with gold stitching

Aluminium bonnet (optional carbon fibre with NACA duct)

Exclusive body colour

Limited edition of 50 per month

V-spec II Nur & M-Spec Nur:

Based on either V-Spec II or M-Spec with following additions

Limited edition of 1000 build only

N1 turbochargers

N1 engine block

N1 pistons with weight balancing

N1 piston rings

Weight-balanced conrods

N1 oil pump

N1 water pump

N1 exhaust manifold

N1 intercooler piping

Exclusive cam cover colour

Exclusive gold VIN plate

Exclusive rear emblem

The Nur was the last of the last R34 GTR's to come from Nissan, and the last produced RB26DETT's, which is why you pay a premium for them. You can see on the above list of modifications why V-Spec's and M-Specs command a higher price than normal GTR's.

Build figures of each are:

Standard GTR: 3,169

V-Spec: 4,619

Nur: 1000

amaru is spot on .

A couple of things to add to though .

All v-specs + m-specs have 2 extra functions on the mdf , i/cooler temp and exhaust temp .

M-specs have heated external mirrors as well as heated seats .

M-specs made from may 2001 on .

I don't know the biult number for m-specs but all up about 1300 including nur m-specs .

M-specs have bigger battery as well as bigger terminals .

  • 9 years later...

Thanks Guys this has cleared up a lot of things for me too as I am in the process of buying a R34 M spec Nur as I thought someone was trying to sell me a V spec Nur with a M spec rear emblem. Just one more thing, what about the seats I know they are leather and heated on the M spec Nur with yellow or silver stitching, but does the M spec Nur have the same leather seats as the std M spec ?? I think all that does change is the stitching colour I think, on the std M spec its just black stitching as per leather colour ?? . For example heated leather seats with the GTR emblem embossed near the top of the seat below the head rest and black stitching is std and all the M specs and just the colour of the stitching changes on the M spec Nurs ?? Sorry if this question is a little confusing.

  • 5 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...