What cluch to buy

[wheels_24]

i am about to put new GT30 ball bearing turbo on my car with few other things i am expecting about 220rwkw + only have the standard cluch any ideas what i should look at buying and what this might cost me

[NZM.031]

GTR pressure plate - $300

new friction plate... either puck or full face - $200 to $1000

lightened flywheel - $400 to $700

that should be plenty good for that much power and constant abuse.

[riggaP]

I recently put in a PBR heavy duty 5 button sprung centre clutch with a custom pressure plate. Pedal feels like stock but tbites heaps harder. $850 installed. PM Dr_Drift for more details as he installed it hes in Melbourne too

[wheels_24]

Thanks guys i will talk to Dr_drift as i think i am going to get him to tune my car for me

[nizmokid]

NPC in queens land sell some great clutches for skylines, I bought one which will hold 300rwkw for $533 = freight!......

[wheels_24]

nizmokid do you have a e-mail address for this company so i can e-mail them i would like to talk to them and ringing a few price and weighing up my options thanks

[nizmokid]

http://www.npcperformance.com.au

[someonestolecc]

I have a 9 puk xtreme clutch (dampened centre) with 860kg pressure plate from horsepowerinabox.com. I'm very happy with this, bites when you want it to but still drivable/slippable in traffic. I was told 250rwkw and under for this.

I've been told the same clutcvh with a 1000kg pressure plate will be ok for under 300rwkw. Cubes/Joel runs one in his rb30 and I bough mine on his recommendation.

$725 if I recall correctly (with thrust bearing)