Jump to content
SAU Community

Recommended Posts

Nissan Stagea RS4-V

Built December 1996

4 speed automatic

70,000 km

Turbo 6 cylinder RB25det

ATTESA electronic 4wd system (same concept as used in the R33 GTR)

Platinum Silver in colour

Leather and suede interior

Electric seats

Climate control

Power windows, locks, mirrors, hatch

Duel sunroofs

TV/Monitor/CD stacker/tape deck/radio

R34 Gtt mags with 235/45/17 tyres

Full three point alarm with GSM (mobile phone) pager

Turbo timer integrated with the alarm system

Paint and panels are in top notch condition as is the interior (see link below for pictures).

The car was 100% stock standard when I bought it. Since buying it I have tuned it for better fuel economy and increased power.

Modifications include a Unichip computer with electronic boost controller, custom made three inch turbo back exhaust with high flow cat, Trust side mount intercooler, high flow panel filter and iridium spark plugs. At 11psi of boost it produced 170rwkw and has increased fuel economy by around 15%.

Always serviced every 5,000km with full synthetic oils.

If your after performance with luxury and practicality then this is the car for you.

Two pages of pictures can be seen here:- http://www.skylinesaustralia.com/ph...t=500&ppuser=63

Priced at $20,400 ono with registration until January 2006.

Email at jay77@iinet.com.au or contact me directly on 0414 707 105

stagea_001.jpg

Link to comment
https://www.sau.com.au/forums/topic/76956-fs-stagea-rs4-v/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Murray, hope all is good. I took your advice and put the filler first then the putty. Seems like a much better result but i noticed there are still pinholes. I even had pin holes when i initially put the putty on the body filler. Do you think it has something to do with my spreader being f*cked? I attached some images. This is the intially body filler i sanded. No putty yet  Applying putty. Final result after using wax and grease remover can see the pin holes. I just noticed as i look at the putty application it looks wavy not sure if it's supposed to be like that or because of the spreader.
    • Hey all just wanting some advice. I’ve just compression tested my RB25det and these are the following results  Cyl 1 - 135psi Cyl 2 - 135psi Cyl 3 - 120psi Cyl 4 - 140psi Cyl 5 - 130psi Cyl 6 - 125psi   do these numbers seem ok.  Thanks in advance 
    • I must say - this is how I picture all R31s!
    • Rust repairs completed, doors back on! pretty much totally back together running now. All future repairs will be fiddly wiring getting everything back up to road condition.  hasn’t  taken that long considering the condition I got the sub. note my helpers keeping the back seat warm 😂
    • SAU NSW Old Pac Cruise to Newcastle All Japan Day 2025 Sunday 27th July 2025 5:00AM Meeting Berowra Station Commuter Car Park 2 5:15AM Departure Cruise Via Old Pacific Hwy 7:45AM Arrival to Lambton Pool (Regroup) 8:00AM Arrival to Newcastle All Japan Day 2025 Meet Location: Berowra Station Commuter Car Park 2 Stop 1: Lambton Pool (Carpark) Final Destination: McDonald Jones Stadium for Newcastle All Japan Day 2025 Tickets: Newcastle All Japan Day 2025 $20 Per Car Spectators Free PURCHASE TICKETS HERE *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...