Jump to content
SAU Community

Recommended Posts

  • Replies 345
  • Created
  • Last Reply

Top Posters In This Topic

sure thing Rick.

we so require a 50% securing deposit prior to bidding/purchasing.

Once we have secured the product, shipping takes approximately 6 weeks to reach your door. Once they have landed here in sydney, we request final payment prior to sending the product to you via local courier.

TE37 to suit GTR

18x9.5 +12

tyres not included, neither are batteries.

bids close 21/6

estimated $2200 landed

ef5861royspec-img600x400-1118955975001.jpg

Hi I'm after a white set of these in a 18 * 9.5 with a +22 mm offset, without tyres. They are going onto a R32 GT-R.

Could you let me know if you find any.

Thanks

Andrew

LM GT MAG

immaculate!!!

18x10 +20.

suit GT-R

closing 14th Aug.

The ultimate light weight wheel

serious buyers only

moro3_2000-img600x450-1123463335img_0057.jpg

How much will these go for? What tyres are on them? What size tyres? How much tread? Are the wheels unmarked?

Work CR Kai

18x9.5 +20

114.3 5hole

RE55S rubber. ready for the track.

auction ends 13th Aug.

shigeyumi816-img600x450-1123420189001.jpg

how much it cost land in melbourne

spec r,

not sure how much these will close at at this stage.

we are estimating these to close at a price that will see these landed in Oz for about $2300+

local freight from Sydney to Melb is $120 on top of the landed price.

Mik, ill pm you with what i know about those LMGT MAG's

Work CR Kai

18x9.5 +20

114.3 5hole

RE55S rubber. ready for the track.

auction ends 13th Aug.

shigeyumi816-img600x450-1123420189001.jpg

wanna ask can u try to get it in for me below 2k if possible i want to place and order and wanna ask how much life the RE55S can last for thx!

at this stage, providing there are no other bidders, yes they will land for just under the $2k mark.

I wouldnt suggest using these tyres on the city streets. They wouldnt be lasting long at all. although many people have been using semi's on the streets, it's their choice.




  • Similar Content

  • Latest Posts

    • If the RB29 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
×
×
  • Create New...