Jump to content
SAU Community

rego? is it needed at club level?

slow_r31
 Share

Recommended Posts

slow_r31 Collaborator

slow_r31

Posted
Posted

basically as per topic,

as part of a slow learning process im building up a track car, nothing special. now as part of the learning to drive bit im aiming to compete at club level for abit or so, before i go for a L3 (im assuming ill need some real track time to get it).

the car im building will be for improved production, and i won't need rego then. but while im competing at club level, will the car need to be registered?

any thoughts/knowledge/advice appreciated

Link to comment
https://www.sau.com.au/forums/topic/77122-rego-is-it-needed-at-club-level/
Share on other sites
Beer Baron Grand Master

Beer Baron

Posted
Posted

also you wont need a C3 for most club events (super sprints, hill climbs, moto khana etc, track days etc). Just an L2S which only requires you to join a cams affiliated club (like SAU NSW) and pay cams some money (~$80).

Beer Baron Grand Master

Beer Baron

Posted
Posted

yeah, where were you today??! I tried to call you but got no answer i was out at OP with Rob again. The two BSM GTRs did well. Dave had an awesome start. we need you out there to keep them honest mate :(

Wont be long now. If you are heading out tomorrow come and say hello, we are in pit bay 24.

Beer Baron Grand Master

Beer Baron

Posted
Posted

mate I was dissapointed to not see you there. do you want to talk about it?? :)

was a good days racing. our man got punted off in race too but came good for race three moving up from 12th to 6th ;)

garth tander drove a civic in improved prod :)

30/7, i'll mark it down :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Should I use rust converter on this?

      By Murray_Calavera · Posted

      The easiest option might be to just spray a bunch of fish oil in there.  At least that way you can feel like you've done something while you continue to ignore it
    • GTSBoy
      WTB noltec r32 front upper (camber) arms

      By GTSBoy · Posted

      I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • GTSBoy
      Brake pad Compound suggestion

      By GTSBoy · Posted

      Plus, you'll get great experience in bedding in pads!
    • Matvei27
      WTB noltec r32 front upper (camber) arms

      By Matvei27 · Posted

      I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • Murray_Calavera
      Brake pad Compound suggestion

      By Murray_Calavera · Posted

      @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
×
×
  • Create New...