Jump to content
SAU Community

The Next GT-R: A little more to confuse you...

Rezz

By Rezz,
in Japan

 Share

Recommended Posts

Rezz Grand Master

Rezz

Posted
Posted

Taken from 'The My Car' magazine (I'm not for or against any info brought out here):

SUPER SPORT SCOOP! - We'll see the prototype this autumn, and a January 2007 debut!

Scan10002.jpg

The Prototype to be shown at this years Tokyo Motor Show will still in fact be a 'design concept', but don't let that fool you. Development is well underway, and what we see at Tokyo in Autumn should be almost final.

The Next GT-R's base body type is actually a Skyline! We've seen the test-mule being trialled at Nurburgring in Germany which was a rebadged Nissan V35 Coupe (LHD Infinity G35), but actually the whole body will form the base of the next Skyline series 'V36'. This can be interpreted as 'the next Skyline (V36) will be designed around the GT-R underpinings, rather than the GT-R being based on the Skyline...'

Breaking news this time is that the Twin-turbo V6 configuration has had it's capacity increased to 3700cc. With the increased capacity, it further assists low down torque in conjunction with the electric motor assisted twin turbos, creating instant positive boost pressure when throttle is applied, giving a 'linear pick-up engine'. We expect the engine to produce in excess of 380hp, and although far higher figures have been quoted, we expect a conservative figure - in line with previous GT-R outputs from factory.

Scan10003.jpg

An 'ATTESA Frame' is the new type of 4WD system being used this time around, incorporating a hybrid drive system: an FR transaxel powering the rear wheels, and combined electric motors for the front wheels, similar to the system used on the Nissan March 'e-4WD', but designed with 'Super Sports' in mind, able to produce much more power and torque with an almost instant reaction time (when wheelspin is detected). This system will not bring shame upon the GT-R name as has been seen in public reation so far. A hybrid 4WD system will take car dynamics to the next level.

The car name will be 'Infinity GT-R'... not 'Skyline'.

/Rezz

xga Newbie

xga

Posted
Posted

Thanks again for the update Rezz. Much appreciated.

I would have thought that with the extra 1,100cc engine capacity over the mighty RB26DETT, the power output would be expected to be significantly higher than the conservative estimate of 380hp. Guess we'll have a better idea in the coming months.

paulR32gtr Mentor

paulR32gtr

Posted
Posted
Thats one ugly lexus :(

Poor Toyota fans are probably going through the same thing we have been over the past 12-24 months with all the ugly GT-R concepts floating around. I really like the look of that Infinity though - hybrid 4wd system!! Thing is gonna weigh a bit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Cleaning my wheels 😍

      By GTSBoy · Posted

      Yeah, my moulds and seals are 32 years old now. I think I will continue to not use a pressure washer on it.
    • Shoota_77
      Cleaning my wheels 😍

      By Shoota_77 · Posted

      I hear the old "I'd never use a pressure washer on my motorbike" BS in the dirtbike community too.  The only people that have had a problem from using a pressure washer on anything are the people that aren't using them properly.  If you hold the wand any more than 45 cms away from pretty much anything (radiators, wiring connectors, paint, etc) you aren't going to cause any damage.  We've had detailers wreck moulds and seals on cars at work before and the only reason why is they held the pressure washer too close and on the one spot for too long.  If you have 5% more brain power than a detailer then you know not to not do that and you'll never have a problem.
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      I'm pretty much healed up post surgery so I spent another almost full day out in the shed re-arranging everything to make room for all of the shit that I've taken off the car.  I need to get everything off the floor and away from the car for when I start making a massive mess stripping off the remaining body deadener and then for the the painting process.  Almost got the shed to a point now where I feel I can actually start working on the car again (clean shed clean mind or something!).  Almost 11 years of accumulated car parts, building supplies, tools, junk, etc have taken a long time to get in some sort of order again!  Most stuff is now boxed up and in the back shed if it's not car related.  Most people would still be horrified walking into my shed but it's significantly better than it was before!   For those that saw my separate post the other day, yeah I ordered one.... This version- I convinced myself to stop being a clown, wake up to yourself and realise it will take you 5 weeks to make one by which stage you're over working on the car again...  Maybe I am getting on top of my "mental ailments" and making smarter choices.... $1450 delivered which will take my miserable half-dutch arse a few days to get over having spent that much!  If I don't have a use for it straight away after my car is off it I might even see if there is a "rental market" for them.  See if anyone wants to hire it for a period of time.  $25 a week or something like that.  I'll worry about that when my car is actually ready to come off it though as that might be a while away!! There's now no excuses now for not ending up with an underside you could eat off! Away for kids sport the next few weekends so hopefully can get the rotisserie assembled ready to go for the car to go straight on it the next available weekend.    
    • The Bogan
      Cleaning my wheels 😍

      By The Bogan · Posted

      I always use my Karcher, but it's only a little one that I picked up from Supercheap  The only issue I ever had with a pressure washer was when I was a kid cleaning coaches, they had a hi-po industrial sized petrol jobbie that would strip paint if you got to close I saying this, we have a fairly high power washer at work with a diesel powered heater that sprays water at about 60°c, it works great for removing old wax and road grime on the underbody after some foam cannon action, albeit from a "stand off" distance of a few feet
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Sorry no - The sandtrap adventure ended the day, happened at the end of the last session. At that time I wasn't hearing any weird noises nor were the brakes shuddering anymore. It was only when watching the videos that I remembered I had these sounds early on!
×
×
  • Create New...