Jump to content
SAU Community

HICAS light

gun-r32

By gun-r32,
in Western Australia

 Share

Recommended Posts

gun-r32 Collaborator

gun-r32

Posted
Posted

My HICAS light keeps coming on after about 15 minutes of normal, straight highway driving.

I had the rear HICAS bar replaced as it was bent, but the light still appears. The steering feels ok, but is a little notchy when you turn the wheel either way.

Im going to take it to Wilkinsons the next time Im in Perth, but in the meantime, anyone got an idea what it may be, or experienced similar?

Link to comment
https://www.sau.com.au/forums/topic/77405-hicas-light/
Share on other sites
Ashy Larry Grand Master

Ashy Larry

Posted
Posted
My HICAS light keeps coming on after about 15 minutes of normal, straight highway driving.

I had the rear HICAS bar replaced as it was bent, but the light still appears. The steering feels ok, but is a little notchy when you turn the wheel either way.

Im going to take it to Wilkinsons the next time Im in Perth, but in the meantime, anyone got an idea what it may be, or experienced similar?

Dude the light comes on when the power steering fluid becomes low as well.......

Check that before spending any money man

Mike

Link to comment
https://www.sau.com.au/forums/topic/77405-hicas-light/#findComment-1415930
Share on other sites
Steve Grand Master

Steve

Posted
Posted

seen the same when a boss kit wasnt fitted properly - I know your case is different, but you did ask :)

Lock your hicas, the car will handle better, you get the added bonus of weight reduction and you can just remove the light bulb from the days. I did this, much better to drive, never looked back.

Link to comment
https://www.sau.com.au/forums/topic/77405-hicas-light/#findComment-1417343
Share on other sites
djr81 Grand Master

djr81

Posted
Posted

rossco,

One of the joys (not) of an 89 GT-R is the randomness of warning lights. Check your power steering fluid levels (top it right up anyway). Also when the warning light comes on, go and have a look at the module in the boot. With the engine on there should be a flashing light. It will flash anything up to twenty something times & then briefly pause. Count the number of flashes & compare with the diagnostics in the manual. I will try & dig the page out if you don't have it. Usually turning the car off/on again makes the light go away.

:(

Link to comment
https://www.sau.com.au/forums/topic/77405-hicas-light/#findComment-1418437
Share on other sites
Jackie Grand Master

Jackie

Posted
Posted

I have this problem too. Mine only comes on when im driving on the highway. From what i have been told it can b anything from the non standard steering wheel or HICAS capable boss kit to air bubbles in the hoses. I dont know if the air bubbles in the hoses is true but thats what i was told. I know a few people who have skylines and their lights come on too. Mine has no change in driving when the light comes on so im not gonna stress about it.

Jackie

Link to comment
https://www.sau.com.au/forums/topic/77405-hicas-light/#findComment-1418998
Share on other sites
  • 9 months later...
jaygtr Apprentice

jaygtr

Posted
Posted
Mine has started to play up again :O, it was ok for a while after instlling spacers but now the light is back on again.

jaygtr, they run hydrolically and can only be stopped with a HICAS lock kit or HICAS removal bar.

If i fit the lock kit will it stop the knocking coming from the hicas motor?

Link to comment
https://www.sau.com.au/forums/topic/77405-hicas-light/#findComment-2085357
Share on other sites
  • 7 months later...
Scratch Collaborator

Scratch

Posted
Posted

After-market steering wheels can also cause hicas issues. The stock steering wheel holds the steering sensor in proper place. I've heard that there are boss kits that cater for hicas (someone please confirm this, i'm looking for it as well). If the sensor is off alignment, it tries to calibrate for roughly 10 mins and when it cant it gives up and fires the warning lamp.

When you start to get notchy feedback and all of that, bar that baby up. not worth the dollars to troubleshoot.

Link to comment
https://www.sau.com.au/forums/topic/77405-hicas-light/#findComment-2725785
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Rb25det Belts Change

      By joshuaho96 · Posted

      Everything I found online said never use it because it'll dramatically reduce belt lifespan.  No, but I have seen excessive v-belt tension cause the audible bearing noise from excessive radial load in things like alternators. So don't overdo it. Ideally you set it to manufacturer spec using a proper belt tension guage. I tried the "clicker" type gauges but those cheap things are trash. They read way too low even when you're careful.
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      This is kind of where I've ended up for the most part. It's easier for me, easier for shops that don't have to deal with my weird criteria/picky standards, etc.
    • silviaz
      Rb25det Belts Change

      By silviaz · Posted

      Will do. Suprised if it's not the starter motor considering it's 30 years old. Will get a volt meter though. Battery is close to new.   Cheers for your help, always appreciated.
    • GTSBoy
      Rb25det Belts Change

      By GTSBoy · Posted

      This almost never happens these days. No. Clean your battery terminals and make sure they are tight. Use sandpaper on a dowel if you have to, to get oxidation off the inside of the terminals, particularly on the -ve. Check the earth cable from battery post to chassis ground and engine ground. Make sure the contact surfaces are clean - including the threads on the bolts that anchor them - because that's where a lot of the contact occurs. Wire wheel on a drill is a good thing for this. Make sure the crimps on those cables are all sound. Assuming none of that causes an improvement: Check the battery voltage after it has been resting for a while. If it's at the lower end of the range, put it on charge for a while, then see if it will crank better.
    • silviaz
      Rb25det Belts Change

      By silviaz · Posted

      I just checked my belt, it wasn't super loose but I could bend it past 90 degrees a small amount so I tightened it up and for the first time ever my car didn't crank first time, had to crank it again lol. Don't know if that was because I tightened the belt or if it's my starter motor going out (been having slow starts for some time). Coulda also been when I was recording I didn't crank the key properly and it didn't save the recording lol.   Is that a thing if you overtighten a belt it struggles to start?
×
×
  • Create New...