Rev limiter

[skypig_31]

Hi i have an 92 r32 gtst but the rev limit has never worked, im pretty sure it still has a stock computer can any one tell me what it could be >?

thanks

[TommO]

What have you revved it to?

I guess the ECU could be "chipped", and someone removed the rev limiter? But thats a pretty weird thing to do.

[skypig_31]

What have you revved it to?

I guess the ECU could be "chipped", and someone removed the rev limiter?  But thats a pretty weird thing to do.

Iv revved it to 8500 rpms the rev limiter cuts at 7000 i thought

[Links]

Yeah usually 6900 on gts-t's isn't it..

[R31 POWER]

Free revving it will go to like 8000rpm+ but hitting the limiter while driving it should be 7600rpm,sometimes it may go a few rpm more.

[Jolinator]

my stock 93 r32 gtst gauge starts redline at 7600rpm, limiter is over 8,

[r33GTS-t-200kw]

my r33 apparently is limited at 7000 but i can fly past that to around 7800 is the futrthest im willing to take it. Also has no speed limiter.. and the tune is really good (see dyno sheet) so im guessing its got a chip? anyone know what types of 'chips' people put in these ECU's?

[QuickR33Melb]

If you purchased the car from Melbourne chances are it is chipped with a Dr Drift chip which removes the speed/rev limiter. they are/were going cheap and many owners brought them. the guys that work at the performance shop I go to said they are nothing but trouble (as one was in my ECU)

I wouldn't recommend trying to redline your RB20 or a piston might go flying through your bonnet!

[RBN1]

If you purchased the car from Melbourne chances are it is chipped with a Dr Drift chip which removes the speed/rev limiter.  they are/were going cheap and many owners brought them.  the guys that work at the performance shop I go to said they are nothing but trouble (as one was in my ECU)

I wouldn't recommend trying to redline your RB20 or a piston might go flying through your bonnet!

there is nothing really wrong with that chip except for the redline. There is no point in increasing the limiter on a stock turbo RB20. I had one in my last car and the before and after dyno chart showed round about a 10rwkw increase.

Its just a pretty generic map that most folks can d/l anyway.

btw rev limiter is not removed but raised up to about 8200rpm

[r33GTS-t-200kw]

the owner that had it before me had it most of the work done by bob hawkins. Does anyone know what chips he uses?

[Bazelinez]

I've had mine to 8K and it still doesn't cut, not risking taking it any further!

Stock ECU..... does go past 180 though......well past.....

[nF]

I've got a mines ecu in mine, and apparently no rev limiter.

Well i've never hit it.

Unless its set over 8500.