Jump to content
SAU Community

Recommended Posts

Hey fellas,

I work for a large Holden dealership in the south east suburbs and we traded in a 1993 R33 GTST about 3 weeks ago in wine red... The odometer is at 101xxxklms the car itself is pretty clean but it needs a general tidy up.

It has a full GTR body kit on it with a 400R front bar.

Panasonic CD player.

GFB blow off valve.

standard wheels.

To be perfectly honest with you we traded the car in for $13,000 and we would like to see it gone because our wholesalers dont like imported cars so its sitting around doing nothing. So in saying that if you would like to purchase this car you can have it for the $13,000 that we paid for it... Please be aware that at this price there cant be any offers because we have to break even on the price. It WONT be supplied with a RWC either.

If you have any further quires please pm me or if you are seriously interested contact me on 0412 115 205. strictly no test drives and please dont sms me or ring me if you arent interested. I dont have a great deal of time on my hands.

Thank guys

sorry... The car is a 5 speed manual, it also has a sunroof aswell and a exhaust system on it that sounds quite nice. I will post up some pictures tonight. When I say it needs a tidy up it just needs a polish and a detail job under the bonnet. Spend a good afternoon on the car and it will look really good. The engine starts fine and runs well. gearbox feels good with no grinding through the gears and the clutch feels good aswell.

for the money i think this car is worth it...

Im not sure if i can hold the car till next week. the managers have had enough of it hanging around. Im not at work today (RDO ;) ) Ill have a chat with them tommorow and see if we can hold it....

very cheap

turbo

manual

sunroof

exhaust

blow off valve

GTR bodykit

CHEAP CHEAP CHEAP

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well some mostly good news and some slight bad news.  Good news is cylinder 6 did in fact only require a honing and I'm good to run my 86.5mm pistons again. I should also get the block back by end of week. Bad news, had a few surprises pop up. First, main and rod bearings were trashed. No sign of any heat damage. I knew right away what caused this... I had not packed my oil pump originally and spent a lot more time than I would have liked cranking the motor to get oil pressure. It sounded fine once started so I chucked it up to luck and forgot about it. Luckily rod and crank are fine and just need new bearings. Engine builder agreed that this was the cause.    Another surprise that carbon covered up very well that I didn't catch, something got sucked up and went through cylinder 1, 2 and 3. Luckily this was no cause for concern, just needed a bit of cleaning up. Valves look fine but he will vacuum test the head this week to confirm. I'm presuming this was something left over from welding my intercooler piping, but we'll never know. I'm going to thoroughly reclean everything.    So all in all, happy the motor is fine, and I'll get it back much sooner than expected. I'll also be taking the time to convert my WMI system over to direct port. I'll snap some pictures of that when the parts come in. 
    • I understand, thanks. Yeah I wouldn't want the car to tip over, I'll try and use the sills, I don't want to risk smashing the chassis rails. I ordered some rubber pucks that have a hopefully big enough slotting. If the front right gives me trouble I can always just make a wood block. I'll measure and inspect the sills closer once I actually take the car up. I hope so, but the rubber blocks I had in hand so far were pretty damn firm, if they are that hard they won't give much way. I'll let you know what happens. Angle grinding rubber isn't one of my favorite tasks. I'll probably start a build thread soon, for my own documentation and "log" as well as sharing what's going on with the car.
    • Kinda something I have been thinking about.  To be honest, we bought it already driving like that.  So there's no telling how long it actually has been driving like this.  Hopefully damage is too bad when we drop the pan.   I am having a hard time finding a site that sells the solenoid for the 5 speed auto, do you have any suggestions?
    • That'll be most likely down the road...  LOL  
    • a stock / option or aftermarket?
×
×
  • Create New...