Jump to content
SAU Community

Cam Gear & Dyno Tuning Results @ Croydon Racing Development


Recommended Posts

I am extremely happy, it drives like a standard GTR @ 60kmh in 5th gear (1300rpm)

2nd gear breaks traction at all 4’s on shear acceleration J

Please refer to attached graph, this is my 4 wheel dyno tune figure by CRD on the 20th June (my birthday)…

THE CAM GEAR DEBACLE…now proven!

I was there from start to finish & saw the comparable difference.

The red line (on the graph) is tuned with cam gears at 0 degrees

The blue line (on the graph) is with tuned cam gears - keep in mind I do have the poncams…what a difference!

Jim has made an additional 100Nm without sacrificing top end delivery…

This proves that adjustable cam gears do make the difference & that Jims dyno tune has made a massive difference in torque!

Only the experienced guru’s of the industry are aware of this advantage.

I also had a long discussion about road tuning with Jim – he is of the opinion that you cannot simulate ‘load tuning’

i.e. load tuning at various rpm’s for a specified time period, where can you do this on the road & how can you road tune a car under load?

At the end of the day Jim has 15 years experience with GTR tuning & the experience alone is working with all facets such as drag, targa, circuit, national teams, race production class etc….who else in Australia works alongside with top tuners in Japan & national racing teams? I guess this is why he is the busiest workshop in Australia, just have a look at the number of performance cars he has in his workshop & yard (over 30 cars).

YOU PAY FOR WHAT YOU GET – yes other tuners are cheaper but you will not reach the maximum potential if cam gears are not adjusted to suit the setup.

The way I see it, if you are prepared to spend over 10k on an engine then investing another $400 additional for a proper tune is the way to go…

Question: would you pay the small difference in tuning for an extra 100Nm of torque?

I am not here to convince you or sell CRD but I did want to share my experience with you as I am extremely happy with the outcome.

Thank you Jim ;)

Regards,

Marko

0404 884 876

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

yeah, I was curious about that too. my guess is boost controll. certainly a very nice number. Very sharp curve. BIG fat top end, but the bottom end seems a little dissapointing to me. I would personally like more 'area under the cruve', but i don't think that's a reflection on CRD more a turbo choice thing. Do you have a graph with Y axis in RPM instead of speed? if so could you post it up?

enjoy mate ;)

The way I see it, if you are prepared to spend over 10k on an engine then investing another $400 additional for a proper tune is the way to go…

Agreed, but you'd be a miracle worker to get Jim to tune a GTR for $400.

$500 is what he normally charges just to dial-in cam gears, let alone TUNE the GTR.

A basic GTR tune starts at $800 and rapidly increases from there.

I have never stepped foot in that workshop without being slapped with a bill LESS than $1000.

Agreed, but you'd be a miracle worker to get Jim to tune a GTR for $400.

$500 is what he normally charges just to dial-in cam gears, let alone TUNE the GTR.  

A basic GTR tune starts at $800 and rapidly increases from there.

I have never stepped foot in that workshop without being slapped with a bill LESS than $1000.

I spoke to them today they said $350-750 for a full tune :) who knows but..

Doing a power run on Saterday morning to see what this biatch is making :Pimp2:

Merli,

Im with blk180....he is saying that it is only an additional $400 or so in comparison to most tuners who charge anywhere b/w 500-700 etc...

Im in agreeance with you marko....fantatsic results...wow pretty impressive!!! Im amazed at the difference with the cam adjustment...thats worth the extra $$ to me!!

I spoke to them today they said $350-750 for a full tune  :) who knows but..

Doing a power run on Saterday morning to see what this biatch is making  :Pimp2:

I'll bet you $50 that he wants to change the oil, and spark plugs before tuning it.

And it seems the more power a GTR makes, the more he charges... Presumably because there's more liability and less room for error with highly-strung GTR engines.

Understandable I guess, but it gets old when you're told "$350-750" and then get slapped in the face with a $1500 bill.

Anyway, good luck, and you have to come to the next dinner and let me take it for a spin... I'm having major power withdrawls :P

P.S. Have you put on an oil cooler yet? :squint:

I'll bet you $50 that he wants to change the oil, and spark plugs before tuning it.

And it seems the more power a GTR makes, the more he charges... Presumably because there's more liability and less room for error with highly-strung GTR engines.  

Understandable I guess, but it gets old when you're told "$350-750" and then get slapped in the face with a $1500 bill.

Anyway, good luck, and you have to come to the next dinner and let me take it for a spin... I'm having major power withdrawls :)

P.S. Have you put on an oil cooler yet? :squint:

I'll come to this months dinner..

I was going to get an Oil cooler but after 4 new so3's + rego i have no bling bling left :P

I'll come to this months dinner..

I was going to get an Oil cooler but after 4 new so3's + rego i have no bling bling left :P

There was a fair amount of meat left on those tyres?!?!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...