GTR Resistor Ballast in GTS-t

[Waldo]

hey i was just wondering with putting gtr injectors in my rb20, do i just get a resitor ballast from the gtr, (the little silver box), and is it just a straight plug over swap? or do i need something else to make the injectors work??

regards luke

[Roy]

There are a few threads about this now, a few in Forced Induction and this tutorial that will at least get you started:)

http://www.skylinesaustralia.com/forums/sh...ead.php?t=62674

If you struggle to get a resistor pack off a GTR (few ppl want to part with them) then you can always make up your own...just meed to visit Jaycar.

[Waldo]

ok so what your saying is that even when you buy the rb26dett resitor pack you still need to modify the injector harness...or is this tutorial if you put in your own resistor pack???

im so confused how to do the swap

[GTR-Ben]

I have a couple of GTR resistor packs lying around, i'm in NZ though

It's as simple as installing the resistor pack, supplying it with constant 12V to the black wire then from your GTS-T injectors running the positive wire from each injector to each of the 6 white wires on the resistor..

[Waldo]

ok so your saying that when i get the resitor pack off a gtr, i have to supply it with 12v to the black wire or as in roy's pictures it looks red. The untape the injector harness and the positive wire that goes to each injector i have to cut the wire and run a new one back to the gtr resitor ballast...(am i correct). Where do the standard positive wires come from then that im cutting and re routing to the new gtr balast??

sry for being a pain just thinkin it might be easier just to go with rx7 s5 injectors and just changin the plugs over

[browny]

Dude it seems to be just a matter of splicing the GTR resistor pack inline with the 12V supply to the injectors. It sounds like something that will become abundantly clear once you have everything in front of you and unwrapped.

Sounds to me to be easier than changing injector plugs. Its only cutting and joining 7 wires.

[GTR-Ben]

Waldo, thats the other side of the plug. The wires on the resistor it's self are one black and 6 white. Obviously the one different colour is the power wire.

The instructions in the link above should be all you need.. quite simple.