Jump to content
SAU Community

Recommended Posts

I searched and can't find much. Link me if it's been done before please.

I have decided to up the boost in the near future, but on a budget, so I was going to get a boost gauge, and I just bought a boost controller for $35 in this thread http://www.skylinesaustralia.com/forums/sh...155#post1427155

I want a boost gauge so I can watch it doesnt spike. I was going to go electronic but I thought I'd get a gauge for $150 so this puts this all under $200. Much better than $600 for a EBC.

However it seems I may have been mislead. There is much debate about the different gauges.

What is your opinion and why (provide links if you have read reviews) on the following gauges.

Autometer (Was under impression they had a good rep, but seems I was wrong)

Splitfire (Hear they are crap)

Sepco (A few have said they are good, most said crap)

Greddy/Trust (As expected, all good reports)

HKS (havn't found anything)

VDO (found 1 post saying they are good)

Apexi (some say they are good, some say not.

Any others?

I am trying to work out what to buy, but if I am paying $300 for a gauge, I'll pay $600 for an EBC with the gauge and bonus features.

Cheers

Chris

Link to comment
https://www.sau.com.au/forums/topic/78160-what-gauge-to-buy/
Share on other sites

Seriously, i think boost gauges going for $300 are the biggest waste of money and wank possible, unless you have a race car.. and probably then you're at the level where somebody else is monitoring the engine status using proper equipment, rather than a simple incabin gauge.

If you are getting your car tuned by an expert, they're going to be monitoring all of your knock, boost and the rest to ensure that is not dangerous using their tools. Its nice to see where your boost is at whilst driving, and what is happening re: spiking and dips, and of course the "open boost" situation is vital to keep an eye on. But a boost gauge afterall is a monitoring tool, rather than a vital engine function.

But I am a tightass, so take this with a grain of salt..

I've had $40 specco boost gauges in my last two cars, and have not had any problems over the years. They may not be the most accurate thing, but who knows whether they are not. A 1-2psi variance between actual and displayed should not a make a difference between engine failure and not (esp. with the stock turbo). They're definitely better than the stock gauge, and even many are happy enough just sticking with that as long as the car is tuned by an expert.

What Predator said.

If your car is running perfectly, then you've got no need for boost, EGT, etc gauges. You only need to watch them if you're having issues with the car, or you're a ricer.

You might get an inlet temp gauge since that's variable and outside a tuner's control, so you could manually set boost depending on the temperature. You'd have to be pretty hardcore to do so, though. Everything else should be a non-issue.

But if you're serious about driving and monitoring your car's readings, get something like the Defi gauges. You shouldn't be watching gauges when you drive, and with Defi you can set a "warning" level to let you know when something exceeds your limits, and use the "replay" function to see what everything was doing at the time of the alarm.

Well the reason I need a boost gauge are;

1) I am going to put in a mechanical boost controller. Without a guage, I might be running 30 psi (ok so slight exageration, but point is I wont know without one since the stock isnt overly accurate)

2) Once it is installed, and I have it set to the right level, it wont matter if it reads wrong as such, so long as i can see a spike. So I guess I can get a cheapy, get it set on a dyno, then just know when it spikes.

you can get the trust/gready quite cheap $118.63 at nengun and they dont need controllers or little digital boxs to run either and come in white ,black and silver and at the end of the day you know you can rely on it being accurate. :thumbsup:

this is the white one:nengun-product-288.jpg

agreed, couldn't have said it better preadator. if you must have a guage get like a $30 one, theres a trader in the for sale section doing swoosh guages for $40 ish each, oil, water, boost, fuel etc in colours that u can choose. serioulsy the best guage or "measure device" is the powefc hand controller, it shows all the values, holds max values and does graphs. handy as. if only there's a cheap easy way to get the powerfc to read boost without controlling it :)

io bought a drift one from auto barn for 50 bucks as i installed the same boost controller in my car. i ended up takin the controller out because the nut kept coming loose i dont know if its because i wasnt tightening it enough or what but i was gettin the shits with the boost changin all the time and i like my exhaust wheel right where it supposed to be not wedged in the cat or somthing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reading your posts Josh, sometimes I feel like I've gone in a time machine back to the 90's when everyone was doe-eyed and figuring things out for the first time.  I've lost track of how many single turbo GTR's I've seen on track that haven't burnt down lol. Everything has been figured out a long time ago. These things are at the point now where its essentially turn-key to go single turbo. 
    • Among other things yes. Making sure to either use an oil pressure regulator or the right restrictor size for your oil pump/range of oil viscosities you intend to run, making sure you plumb the lines correctly, turbo should be placed such that it siphons properly even when the water pump isn't turning so you don't boil coolant in the turbo after shutdown, oil return should be low resistance and also preferably picking the one that is most likely to return to the pickup as opposed to some other irrelevant part of the pan. It's far from impossible to figure this out but I have seen people really, really struggle and if that's the case it's easier to just take the path of least resistance. To me, bolt-on twin turbos are a fixed cost whereas single turbo is almost unbounded.
    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • Ceramic coating and heat shielding, you mean?
    • Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
×
×
  • Create New...