Jump to content
SAU Community

"shockies"

vas_95
 Share

Recommended Posts

Wink Grand Master

Wink

Posted
Posted

I (and many other SAUers) own and recommend Bilstein shocks.

www.bilstein.com.au

You could also go for other well-known brands like HKS, TEIN and Cusco.

Note with any overseas made shocks, you should pair them with Aussie springs (like King Springs) to suit our crap quality roads.

Link to comment
https://www.sau.com.au/forums/topic/78233-shockies/#findComment-1428820
Share on other sites
vas_95 Contributor

vas_95

Posted
  • Author
Posted
I (and many other SAUers) own and recommend Bilstein shocks.

www.bilstein.com.au

You could also go for other well-known brands like HKS, TEIN and Cusco.

Note with any overseas made shocks, you should pair them with Aussie springs (like King Springs) to suit our crap quality roads.

So with the bilstein do they come adjustable, i have adjustable tanabe at the front

and need the rear to be replaced

cheers

Link to comment
https://www.sau.com.au/forums/topic/78233-shockies/#findComment-1428827
Share on other sites
SteveL Mentor

SteveL

Posted
Posted

In the interest of balance, koni's are every bit as good as bilsteins:

http://www.toperformance.com.au/index2.html

I've used both, road and race, car and motorcycle. Properly set up they are equal. Personally I'd recommend looking at Bilstein's or Koni's over the 'name brand' Japanese suspension.

Link to comment
https://www.sau.com.au/forums/topic/78233-shockies/#findComment-1430893
Share on other sites
Sydneykid Grand Master

Sydneykid

Posted
Posted
In the interest of balance, koni's are every bit as good as bilsteins:

http://www.toperformance.com.au/index2.html

I've used both, road and race, car and motorcycle.   Properly set up they are equal.    Personally I'd recommend looking at Bilstein's or Koni's over the 'name brand' Japanese suspension.

Sorry SteveL, but they are not. I use Konis on lots of cars, I like them very much. But not on Skylines, since they are not sold in Europe, Koni use Japanese recommended valving. This simply does not work as well as the Bilstein valving in our conditions. I am not the only one with this opinion, check around the guys that have tried both.

:)

Link to comment
https://www.sau.com.au/forums/topic/78233-shockies/#findComment-1431174
Share on other sites
SteveL Mentor

SteveL

Posted
Posted
Sorry SteveL, but they are not.  I use Konis on lots of cars, I like them very much.  But not on Skylines, since they are not sold in Europe, Koni use Japanese recommended valving.  This simply does not work as well as the Bilstein valving in our conditions.  I am not the only one with this opinion, check around the guys that have tried both.

You assume that I haven't....I've found that in virtually every case there's been other explanations (eg poor spring choice). Indeed I've found the same with Bilsteins. As I said.....'properly set up......'.

Link to comment
https://www.sau.com.au/forums/topic/78233-shockies/#findComment-1431195
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • PranK
      How to attach wing for moulding into the body

      By PranK · Posted

      Thank you!
    • Matvei27
      WTB noltec r32 front upper (camber) arms

      By Matvei27 · Posted

      Bump 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Neostead2000
      Water leaking into the rear trunk

      By Neostead2000 · Posted

      Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
×
×
  • Create New...