Jump to content
SAU Community

Recommended Posts

Hello i'm trying to remove a r32 rear seat in order to put 6.5in speakers in?

How do i get the damn rear seat out lol, whats the trick to it, like which bit do you start at?.....etc etc

And are 6.5 inch speakers easy to put in the parcel shelf, like to screw in to place?

Thanks much appreciated!!!!!!! :wizard:

1. 6.5" Speakers are factory hence screw straight in ;)

2. Remove base of seat first, fold and slide front seat forward, jam your leg in there and using your knee for force push back on the seat, whilst putting downward pressure on it with your hands, it should pop up and out as you release it. You can then remove both screws from the bottom of the backseats backrest and remove that, the shelf should slide out.

Enjoy ;)

It's pretty easy champ - basically your seat sits on some "doobies" your seats just have some hooks.

Before you do this the seat will be jammed in to stop the shove upwards in the normal course of thing so push it in at the base as you shove it up. Atleast that's how it is on the cef.

Someone mentioned some screws I didn't have any of those but remember the seat was pretty easy to get out just by feeling around and pushing certain angles on it. I would try just using your instincts if all else fails, this is one of those jobs you can do just as well without instructions.

Good luck ;)

there should be two bolts holding the seat down on bottom left and bottom right.. if they're not there, your seat isn't be held in correctly!

but yeah, just push in, and shove really hard upwards. You can also try maybe bending the sides of the seat in with your arms whilst pushing up.

omg lol afte reading all that and trying the above i found the easiest way to do it out of all.

Get a crowbar from your boot put the long peice of metal on under each corner (left+right) and pull up, the seats were out in 5 seconds!!!

I recommend this to anyone after trying like half an hour of the other technigues mentioned lol :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seemed to be good when Jeff owned it but they did a shit job on my car, probably worth a think before spending 10's of thousands of dollars where they might be cutting corners
    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
×
×
  • Create New...