Jump to content
SAU Community

  

266 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

reinforcing the last comment, has anyone noticed how long it takes for a car to warm up at idle? so thus you are running the car "cold" for longer? there has to be a middle ground. for me, it's taking it easy for the first 5-10 minutes of driving.

have you guys ever watched a F1 race car warm up from cold ... they rev them at a particular rev range at given tempretures as the car warms up to minimise the cold rattly pistons bashing around in the cylinders thus reduce engine wear ...

also i think somewhere i read the 75% of engine damage occurs in the first 5 mins of a car starting because it is outside its optimal heat range so getting the car to its optimal heat range as quickly as possible by driving it (within limits of course ... i dont mean that as soon as you start the car you have to dump a second gear burnout :D ) would be the best way to go?

Excuse the ignorance if i am wrong =P

have you guys ever watched a F1 race car warm up from cold ... they rev them at a particular rev range at given tempretures as the car warms up to minimise the cold rattly pistons bashing around in the cylinders thus reduce engine wear

They also heat the oil up to temperature before pouring it into the engine, to make further reduce the time it takes for your engine to warm up (which, in most cases, is to ensure the oil has enough heat to reach the proper viscosity).

IMO, 10-15 minutes is wayyy too long. Just a waste of fuel!!

Yeah but, the needle on the temp is just creeping up almost half way and the oil temp is just starting to move once I hop in. It's a small price to pay for proper maintenance.

It's a small price to pay for proper maintenance.

No its not, thats 15minutes of the engine running at sub operational conditions hence more wear and tear, also running it at idle for 15mins would start to glaze the bores wouldnt it?

I think this would be doing more damage then its preventing, also your gearbox and drivetrain wouldn't be warmed up either.

get dressed for work, start car, set turbo timer on 10mins, go do everything else i gota, come back out about 7mins later and take it easy till is about 1/3 - 2/4 of the way up, then have a lil fun when i get to the 80-90 zones.. mmm windy fast roads *drool*

edit: although after reading what every1 has said, i mite not warm it up for as long from now on.. just a min or 2 then drive like a granny till she warms up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just be warned that that turbo will not be a direct re-fit to the car. The exhaust housing is, of course, in the same place. It has to be - it's bolted to the exhaust manifold. So the dump will fit up. But the centre housing is not as long, so the comp housing will move backwards. This will affect both the turbo inlet and the outlet. There is fab work that needs to be done. Yes. it has one, it should have one. Paper gasket.
    • I only recently purchased the vehicle, it came with the flex setup but the current tune is e85 only, which is why im wanting to get the tune redone to enable a mixture.  First i need to get the exhaust redone tho. I was thinking of getting a varex muffler but it sems they dont fit well in the 33 (hang low because of the valve mechanism which sticks out on top) and generally dont sound good. So that leaves me with redoing the entire exhaust (more resonators and mufflers) so its not a menace when i come and go from home, and then have the aes dump valve somewhere along the line to really open it up. I was thinking of having it before the cat but after seeing how insanely loud it will be (on a vl turbo) im thinking of putting it more towards the rear of the car, after one of the resonators. 
    • At this point I'm just 'hoping' it's the turbo seals. I did speak to someone who said it's normal for these turbos to have a bit of axial play? Not gonna lie I've never checked a turbo for axial play before but you could hear it tapping a bit as I moved it back and forth. Surely that's too much? My theory is (could be completely wrong), bad axial play, worn bearings, bad seals, oil into dump/compressor side, burns in exhaust = blue smoke. On a timing belt related note, my crank pulley was missing that front plate that sits in front of the timing belt. It's that metal round plate. It did have the rear one, and the woodruff keys are in the crank which was nice. Can anyone confirm if the NEO det engine has a front plate, im sure it would to protect the front of the timing belt or something. Water pumps...the pump I got was an NPW (yes grill me if I should've got a genuine one lol). It has a smooth mating surface, kit came with a pretty pathetic looking paper gasket. Do I need to use any RTV or just trust the gasket will work because its a smooth mating surface? Cheers legends have a good Easter break!
    • Cheers man, I thought the same.   Bit of an update on it all. It was definitely blue smoke, not grey after all. It didn't really smell oily but it was blue after all. Also puffing just the smallest amount on idle with no throttle.   I ended up pulling the intake and exhaust off and there was around 3mm of axial play on the turbo shaft. So I figured we'll that's buggered and sent it off to get hi-flowed at hypergear. Haven't got it back yet.   I haven't compression tested it yet. Had a look in the cylinder and cylinder 1 spark plug, looked a bit sooty but not oily. Then I've just started doing my timing belt because it's age is unknown.
    • In that case it is probably stock. It lives in the navigator side footwell behind the plastic trim just in front of the a pillar.
×
×
  • Create New...