Jump to content
SAU Community

  

266 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

reinforcing the last comment, has anyone noticed how long it takes for a car to warm up at idle? so thus you are running the car "cold" for longer? there has to be a middle ground. for me, it's taking it easy for the first 5-10 minutes of driving.

have you guys ever watched a F1 race car warm up from cold ... they rev them at a particular rev range at given tempretures as the car warms up to minimise the cold rattly pistons bashing around in the cylinders thus reduce engine wear ...

also i think somewhere i read the 75% of engine damage occurs in the first 5 mins of a car starting because it is outside its optimal heat range so getting the car to its optimal heat range as quickly as possible by driving it (within limits of course ... i dont mean that as soon as you start the car you have to dump a second gear burnout :D ) would be the best way to go?

Excuse the ignorance if i am wrong =P

have you guys ever watched a F1 race car warm up from cold ... they rev them at a particular rev range at given tempretures as the car warms up to minimise the cold rattly pistons bashing around in the cylinders thus reduce engine wear

They also heat the oil up to temperature before pouring it into the engine, to make further reduce the time it takes for your engine to warm up (which, in most cases, is to ensure the oil has enough heat to reach the proper viscosity).

IMO, 10-15 minutes is wayyy too long. Just a waste of fuel!!

Yeah but, the needle on the temp is just creeping up almost half way and the oil temp is just starting to move once I hop in. It's a small price to pay for proper maintenance.

It's a small price to pay for proper maintenance.

No its not, thats 15minutes of the engine running at sub operational conditions hence more wear and tear, also running it at idle for 15mins would start to glaze the bores wouldnt it?

I think this would be doing more damage then its preventing, also your gearbox and drivetrain wouldn't be warmed up either.

get dressed for work, start car, set turbo timer on 10mins, go do everything else i gota, come back out about 7mins later and take it easy till is about 1/3 - 2/4 of the way up, then have a lil fun when i get to the 80-90 zones.. mmm windy fast roads *drool*

edit: although after reading what every1 has said, i mite not warm it up for as long from now on.. just a min or 2 then drive like a granny till she warms up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all. I am aware there is lots of discussions about jacking points, where to lift the car and what not. But as usual just a lot of "in my opinion" and nothing definitive, and everyone does it in a different way. I want to hear from some experienced people on which points on the car it's okay/safe/recommended to lift the car using a four point hoist/lift. I will attach some images of my underbody. Sills are largely okayish, the driver side jacking point is pretty mangled though and it looks like the underfloor is slightly pushed in too, but I might be wrong. In the German Skyline forum, the consensus is to use the sidemember chassis rails in the front and the rear subframe? bushing in the rear. I know the manual says to never use the sidemember for loading but lots of folk do it and it was definitely done on my car too as they are slightly bent too. Based on the images, what points do I use to not make the already present damage worse? I'd use wood or rubber blocks to spread the load across a bigger area of course. Driver side sidemember and jacking point mangled one) https://imgur.com/a/eKjzrJX Driver side rear jacking point https://imgur.com/a/W3DWF1P Passenger side sidemember and jacking point https://imgur.com/a/65UvIJe Passenger side rear jacking point https://imgur.com/a/h3k7j53 We can also see some underbody rust but so far it all looks somewhat treatable and nothing that requires a Yoshida style restoration.
    • Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
×
×
  • Create New...