HKS tripple plate clutch

[Noddy]

I have a Complete HKS triple plate clutch and flywheel in excellent condition for any RB series engine. It is a push type so is perfect for any big hp GTST.

I should have some pics up later today.

$1,200 neg

Email, [email protected]

[GTR090]

hey dude, wats the condition of it like?

Will it fit an R32 GTR? Push type......

thanx

[Cefiro_PWA]

If your R32 has a push type gearbox it will fit.

R33 GTS-t's share the same gearbox as a early model R32 GTR.

[Noddy]

It actualy came outof a mates early 32 ,10 sec drag car in Jap, he has moved onto a complete hks gearbox setup.

here it is

[Noddy]

This shows how much material left on the clutch plates they are near new

[Cefiro_PWA]

The pads look cactus.

standard is 4mm, they dont even have 2mm

[Noddy]

Only on a std organic single plate have i seen close to 4mm of clutch material and then they have rivits that hold it all together. These are bonded.... note the lack of rivits.

Think about your statment for a moment.

we'll be generous, if there is 2mm missing off each side of the clutch plates,

3 plates with 2mm off both sides means

4mm toltal off each plate which when multiplied by 3 plates is........

12mm total worn off

How many clutches have that sort of throw in the pressure plate arc?????

At any rate I will get it checked at Race Clutch Tomorrow and we will see just how stuffed they are.

My bet is there in pretty good shape.

[GTR090]

yeah, keep me posted dude, thanx.....

[Noddy]

I'm keeping the clutch for my 33 so I can do The Leyburn sprints before my new one arrives.

[Cefiro_PWA]

I'm keeping the clutch for my 33 so I can do The Leyburn sprints before my new one arrives.

Good luck.

[Noddy]

Good luck.

thankyou.

Its in and it is fantastic, not a very heavy peddle and takeup is just off the floor and takes up real quik!!!! I like like