Jump to content
SAU Community

Recommended Posts

I believe this would be a setup, fairly typical of your average 'modded' gtr.

Here's what Ive just done, to my previously stocker RB26

R34 N1's

A/M Dumps s/s

700cc injectors

3" Mandrel Bend, SS Exhaust, Turbo Back

Hi Flow Cat

K&N Pods

Wolf 3D V4 Plugin ECU

That lot has pretty much chewed into my initial 'Stage One' budget, with a little left in the kitty for some dyno hours. I plan to run boost at 1.0 bar for street, and 1.2 for strip.

Im just curious as to what 1/4 mile time I should expect from that? I know a lot will depend on driver, conditions, track etc. but Id just like to know a round about figure. Im hoping to go mid 11's? A bit ambitous, or very possible.

Any advice is appreciated.

Link to comment
https://www.sau.com.au/forums/topic/78477-what-to-expect-typical-gtr-setup/
Share on other sites

Im just curious as to what 1/4 mile time I should expect from that? I know a lot will depend on driver, conditions, track etc. but Id just like to know a round about figure. Im hoping to go mid 11's? A bit ambitous, or very possible.

No, I think you should run in the 11's, although high 11's :(

high 11's alot depending the hp your making and how well the car setup will launch

ie tyres, clutch, and how hard your going to be on it.

cefiro_pwa =got no idea as usual (take a look at the timeslip times verse hp in this forum)

these car are all cross australia unless we all can't drive (or are we going to get the Quote "my mates car" )

OK specs as follow:

G707160-7 GTR Ball Bearing Replacements 375 hp N1 Comp .42 a/r turbine

housing .64a/r

I should mention that Im currently running stock clutch, and by the looks of ppl opinions, I should refrain from trying 1/4 times without upgrading first. For now, I think I'll work on getting a really decent tune, Im really prepared to invest a bit of $$$ in this area.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...