Jump to content
SAU Community

Recommended Posts

hey

buy a r32 type M and im susing out teh brakes to make sure there the right size.

wat are teh sizes for the Type M im pretty sure they are teh GTR brakes, and im sure they are 4 pot front 2 at rear. i know the type M come wit gtr rims and stearing wheel. i just want the actuall measurements of teh Type M brakes

:confused:

Link to comment
https://www.sau.com.au/forums/topic/78613-r32-gts-t-type-m-brakes/
Share on other sites

Hi there,

Good luck on finding your information - it's all here already however as this topic has been covered before. Try searching for it and you should be able to dig up the info you're after.

You should really learn how to spell and form sentences properly and you'll get more response too.

:)

Cant really understand what your asking for, but the type M does have 4 pot front and 2 pot rear brakes, but they arent the same as the GTR ones.

The type m does not come with GTR wheels or steering wheel.

R32 GTSt type M rotors are 280mm x 30mm thick

R32 GTR rotors are 296mmx32mm thick

R32 GTR rims look similar but aren't the same as type M as they are wider and forged alloy

where the type M are cast alloy.

The steering wheels are similar too but the GTR has a different horn button.

R32 GTSt  type M rotors are 280mm x 30mm thick 

R32 GTR rotors are 296mmx32mm thick

R32 GTR rims look similar but aren't the same as type M as they are wider and forged alloy

where the type M are cast alloy.

The steering wheels are similar too but the GTR has a different horn button.

Boo yaaa... told you I was right..

Yeah they are more rare, but are a lot more common now due to the 15 year rule. Back when compliance was $3000 for r32 gtst's, there probably wasnt much point in bringing in non-type-m r32s.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: Tunehouse looked into the problem and identified a wiring issue between the camera unit and the connector. They managed to get it working , but did warn me at some point it will stop working again. From their perspective it is unserviceable and will need replacement. They did some research and found that the new replacement camera would be Approx $1400 supply only (their fitting cost would be $190) . They did provide the part number (28442-JL05B) and a quick google of the part number shows that these are rather expensive brand new (seemingly no longer in manufacture) for the places that still have them in stock, with the used option potentially presenting  the same issue down the track at some unknown point. They are happy for me to supply the part so that they can fit it. Decisions, decisions... I can definitely recommend Tunehouse (thankyou Vee37!). Cost for the diagnosis was as quoted  ($190) , car was ready on time and communication was top notch. Their workshop is super clean and modern, and there was plenty of car candy parked out the front on the day I went.   Would definitely go back.   
    • to fix the voltage drop issue I swapped out the old 150amp alternator which turns out is a brand known for having issues and replaced it with the black 180amp alternator beside it 
    • For anyone interested, the Way Back Machine has that Japanese website archived with pictures, etc: https://web.archive.org/web/20051023225805fw_/http://www.a31cefiro.com/air_con.htm "Simply swapping the wiring of the harness will not allow it to function properly. For the outdoor air sensor and sunlight sensor, disconnect the wiring connected to CN1-11 of the air conditioning harness from the harness and connect the sensor side wiring to earth. For the indoor air sensor, disconnect the wiring connected to CN2-3 of the air conditioning harness from the harness and connect the sensor side wiring to earth. The connector PIN numbers listed here are the genuine A31 PIN numbers. To avoid incorrect wiring, check with a tester before wiring. Also, disconnect the wiring in a location close to the sensor. The disconnected harness side wiring will not be used, so be sure to insulate it." Wish someone sold a conversion harness to just plug-and-play a Kouki 180sx digital climate control into C33/A31. I'm decent with wiring but feeling kinda lazy about taking this on. Edit: Did some more digging and found a helpful Minkara blog post about the conversion as well: https://minkara.carview.co.jp/userid/1831116/car/1360568/2284209/note.aspx "After installation is complete or the battery is replaced, you need to go into self-diagnosis mode and set the internal air recirculation. The way to do it is to "hold OFF with the key on for more than 5 seconds, set the number to 5, then press 卍→C." ↑↑↑It probably won't make sense unless you actually try it (・∀・)." Lol wtf
    • Maybe SAUNSW could see howany members would do a motorkhana day if Schofield's is still available for a reasonable price...
    • Skip the concrete, we just need to smooth a field. Mark knows how to drive a grader Duncan   I reckon 100x100 flat area for skid pan style, and then some sort tracks for rally... Duncan's already got a rally car on the premises to...
×
×
  • Create New...