R32 Boss kit Help pls !

[Tours]

Hey.

I need some information about a Hicas boss kit for an R32 GTS-T.

I have read through the forum and understand i need a Hicas boss kit, and that the code is something like 115, not the 110 model.

Howerever when my mate at autobarn called autotechnica to order one they said the 115 was for an 300zx, so now i am confused as to which product to order ??

If anyone has recently or in the past ordered a Hicas boss kit for thier 32, and had no troubles, can u please let me know where u ordered it form and what was the model code ?

Anyone with any information to help me out would be greatly apreciated .

Thanks

Mark.

[Tours]

Please, Dose anyone have any information on this ?

Mark.

[Phantom32]

the boss kit is the one on the steering column right? I'm pretty sure that autobarn should stock one for you - thats where i got mine from. Can't remember what brand it is, but i don't remember anything about there having to be a different kit for HICAS.

If its not for the steering column then plz disregard.

[inark]

get them to look it up in the book... disregard the number u got somewhere else.

if that fails go to repco... mine came in 2 hours from another shop cause the one i went to didnt have it.

[Tours]

get them to look it up in the book... disregard the number u got somewhere else.

if that fails go to repco... mine came in 2 hours from another shop cause the one i went to didnt have it.

Ok thanks.

Do you remember what code urs was and what brand ?

[Tours]

ok.

I got a boss kit, it is a hkb boss kit, it was ordered from autotechnica and the code 110. I asked autotechnica to make sure this was the correct boss kit and was a hicas boss kit and they assuered us it was, so i ordered it, took off the stock steering wheel, fitted the boss kit.

After driving for a while, youl never gues what hapened, YES the hicas light came on.

Now just wondering if this is because of thhe incorect boss kit, or could we have done something wrong during instalation such as accidently adjust the sensor ? if so dose anybody know what we can check and where it is.

ANd if it is the wrong kit, they will be hearing about it lol.

Thanks.

Mark.

[Duncan]

Probably an installation problem You need to make sure the wheel and boss are on perfectly straight otherwise HICAS thinks you a re driving in circles all the times and gives an error code.

Undo the wheel again, drive along about 20m in a straight line, then put the wheel back on. Should sort the problem.

[Tours]

Ok.

It was the wrong boss kit, which autotecnica constistanly claimed and still dose was the correct boss kit. it was an ON 110. This model was to be installed in the 2 and 8 oclock position, so when i installed this one the hicas sensor was moved.

I ordered a 115, which was to be instaleld in the 12 oclock 6 oclock position, Which is where the horn connection and hicas hole are on the stock wheel.

I have installed the new boss kit and now all is well, no hicas promblems (Crosses fingers).

And even after telling them about the stock wheel they sent out this kit but claimed it would be wrong.

So i hope this will help some ppl in the future as autotechnica didnt knwo what they were on about. Maybe it might fit some models of R32, but for a 1993 GTS-T with Hicas i needed the 115. If you thinkinhg of ordering a boss kit to save urself some hastle, take off the stck wheel and see what position the horn button and hicas hole are in.

On 110 - Installed at the 2 oclock 8 oclock posiiton.

On 115 - Installed at the 12 oclock 6 oclock position.

Pz.

[Mecha]

what does a boss kit do?

[Tours]

what does a boss kit do?

It adds 50kw to the vehicle.

Lol, nah its just so u can fit on an aftermarket steering wheel.