Jump to content
SAU Community

Recommended Posts

I don't agree. You are making a sweeping generalisation of the behaviour of Police based on nothing else other than a handful of observations and second hand internet ramblings. Maybe there were legitimate reasons why the Police acted in the manner they did? You simply don't know enough to make the situation to make this call.

By using these powers for legitimate reasons they aren't "getting away" with anything. You can't "get away" with something you are allowed to do.

Exactly why do you think this? Can you not see that there are certain situations where a Police Officer needs to break road rules so they can effectively carry out their job?

Are you involved in law enforcement or what? whilst it appears your comments and negativity are an attempt to shoot everyone down because you have read the so called "Part 19 Section 305" and know evrything, most people here are only opinionating.... which is certainly not against the law!

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

I think the point is this.

A trady using a mobile phone in a van needs it to do his job.

A copper using a mobile phone to do his.

What's the difference? None. The case is that the copper could be using the phone to save someones life. Fair enough BUT the law is the law so technically they shouldn't be able to do this.

We all know they can break the law to enforce is, but philosophically that is too arbitrary, that's why we have law enforcement (police) and a judiciary (check mechanism). If the police is allowed on the spot to say "well I'm breaking this law, to uphold this" it becomes self-perpetuating and arbitrary (more so than it is already).

Personally, I think we should all be given more leeway. If you crash because of a mobile phone you should get reemed. If you use it and noone else is around I don't think you should get booked.

Are you involved in law enforcement or what?

Not involved in law or law enforcement at all. Don't particularly like or dislike Police either.

most people here are only opinionating....

So am I, the reason I am being so blunt with my comments I'm all for informed discussions based on reliable information rather than the heresay and conjecture that usually gets bandied around whenever a topic such as this is brought up.

I agree that they should be able to work outside the law if the need arrises, but does this mean taking the lives of others in their hands whilst doing so?

Undoubtedly not, the ruling even specifies they must take reasonable care.

We can all argue forever about what reasonable care means though.

Are you involved in law enforcement or what? whilst it appears your comments and negativity are an attempt to shoot everyone down because you have read the so called "Part 19 Section 305" and know evrything, most people here are only opinionating.... which is certainly not against the law!

hahaha i was thinking the same thing, this guy sounds like a cop and really doesnt know what his talking about

All I want to know is... what's the diference between using a mobile phone in your hand (held to the ear and mouth) and the good old fassioned CB Radio... (held to the mouth)?

Correct me if im wrong... but wasn't it perfactly legal to use the latter while traveling on the road?

It's called MEDIA DRIVEN LEGISLATION, just like the hoon laws.

I've seen cops do crazy shit all the time. I remember seeing a patrol car packed with cops driving around like 18 year olds in a clapped out commodore on party night.. swerving around and just being dicks.

They are human as well, of course they abuse their power. I would too if I was in their position. But then again thats why I chose not to be a cop. :)

Quick question?

We can all say cops can bend the law if/ when the need arises........correct. If we reverse that, does that mean us to (civillians) can bend the law when the need arises.......and is justifiable?

I'm usually ok with cops using there phones, i just really HATE 1 department from the force and that TRAFFIC/ HIGHWAY FULLSTOP for obvious reasons.

My 2 cents anyway

Quick question?

We can all say cops can bend the law if/ when the need arises........correct. If we reverse that, does that mean us to (civillians) can bend the law when the need arises.......and is justifiable?

I'm usually ok with cops using there phones, i just really HATE 1 department from the force and that TRAFFIC/ HIGHWAY FULLSTOP for obvious reasons.

My 2 cents anyway

Just what i was gonna ask..

If we were in the same position as a copper, voluntarily assisting someone in an emergency which required the use of a mobile phone whilst driving a car, does that mean that we are allowed to?

Browny - are there exemptions to civilians in such a situation or are the police the only ones applicable to such exemptions?

Browny - are there exemptions to civilians in such a situation or are the police the only ones applicable to such exemptions?

Can't see anything at first glance but you can look yourself, it's all freely available info -> http://www.rta.nsw.gov.au/rulesregulations...1.html?rrlid=21

I'm not an expert on this!

My guess is that a clause like this doesn't exist because then everyone would start trying to get off on technicalities. However I would certainly hope that if I was in that position, I would not only be shown leniency by the Police but assisted as well.

I know a couple of times when dad has gotten an escort by the cops when he was rushing to hospital to work with Dr Victor Chang on emergency open heart surgery. The funny thing was that he was in overalls covered in paint at the time. The cop started off suspicious but that all cahnged when the story was confirmed.

Sure thats a bit of an extreme example but it came straight from the source.

this guy ... doesnt know what his talking about

TracidTrax between one person citing legislation and a lot of people starting with "I reckon..." I think you're backing the wrong horse by saying browny doesn't know what he is talking about.

We all need to keep in mind that the lowest common denominator, as far as police driving skills go, is a lot higher than the same for the general community. Road rules must take all drivers into account - I'd feel very comfortable seeing most people on the road using a mobile, but if my grandmother tried it I'd be very scared. The road rules need to consider everyone's ability and if you take police aside as a separate group their average skill level would generally be much higher.

The same guarantees (provided through training competencies) don't exist for the general public.

there r ways around this, cop cars should have their phone connected to the car speakers ie: get a goddamn "car kit" they have all these other gadgets in their car so y dont they have that or use handsfree, every one else has to obide by them rules y cant they?

Quick question?

We can all say cops can bend the law if/ when the need arises........correct. If we reverse that, does that mean us to (civillians) can bend the law when the need arises.......and is justifiable?

I'm usually ok with cops using there phones, i just really HATE 1 department from the force and that TRAFFIC/ HIGHWAY FULLSTOP for obvious reasons.

My 2 cents anyway

When i lived in the UK (same laws apply) I was driving behind a Jag XJS which was all over the road and I mean ALL OVER THE ROAD and was prooving a real hazzrd to himself and everyone else.

I used my mobile to ring the police while tailing him.

I have the details of his car and told them exactly where he was, and were we were heading.

I gave full details of myself (as required) and made no attempt to hide the fact that I was using a phone while driving.

They did not arrest me. They did not caution me in any way.

Make of that what you will.

im in agreeance with alota other people who have posted in the way i think coppers do abuse there power, although i cant say EVERY cop does, just alot of MY personal experiences there has been cases where they do, eg. i got pulled over once and got a speeding fine, the copper took off after giving me the fine.... leaving a huge burnout mark down the road??? now umm, there was no other car in sight and i doubt he was going to another emergency like 2 seconds after getting back in his car.

the way i see it, they should abide by road rules like everyone else when there just doing normal patrols and such, just coz they wear a bue uniform and carry a badge doesnt make them any different than anyone else on the road, they should break road rules ONLY when its an emergency, not just because they feel like it and dont think anyone else will say anything simply coz there in a cop car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks, I removed the fuse and the relay from the car and made my own circuit with them to test them with a test bulb.  I will look for the wiring diagram and go from there.
    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
×
×
  • Create New...