Jump to content
SAU Community

Want Performance Modifications Done To Your Car Cheap Money Wise? If So, Look In Here

Nozila

By Nozila,
in South Australia

 Share

Recommended Posts

Nozila Grand Master

Nozila

Posted
Posted

hey guys/girls,

where do i start, I can basically do any performance modifications to your vechicle at a relatively cheap price. I would like to offer my service because I love working on cars specialising in nissans ie skylines/silvia/180sx/s15 and i know how much workshops can charge. Mods I can do include exhaust install and fmic install. In addition to performance modificaitons, i can also do sound system installations and also basic maintenance to your vehicles such as changes to oil, spark plugs, fuel/oil filters, fuel pump replacement etc. If its related to cars then i can pretty much do it. Basically, i can perform any maintenece/mods to your vehicle exceptions are rebuilds, any internal engine work and road tuning of pfc.

My service is designed to cater to individuals who want the convenience, reliability and professional service of performance mods/maintence done to their imports but dont have the time to do it themselves at a fraction of the price that workshop's charge. If you are interested or would like to enquire about something done to your car.

Post here, PM and Call If Interested.

Duc

0424082939

Here is just an example of a fmic that i did not long ago on a r34. Something like this would only require half a day tops.

BEFORE

DSCN0047.jpg

DSCN0054.jpg

front bar off.

DSCN0055.jpg

DSCN0056.jpg

stock intercooler off.

DSCN0060.jpg

DSCN0063.jpg

lining up the pipes.

AFTER

DSCN0065.jpg

yay front mount on. Its a Blitz, LM edition i think. Its so light compared to mine.

DSCN0067.jpg

DSCN0068.jpg

Nozila Grand Master

Nozila

Posted
  • Author
Posted

here's one statement from a customer who had his spark plugs changed.

Duc is a nice guy........ helped me out with my sparkies as my car won't start....took me to autobahn to get them as well... You guys should go to his place to to get work done...hehe :)
Nozila Grand Master

Nozila

Posted
  • Author
Posted

here's one statement from a customer who had his spark plugs changed.

Duc is a nice guy........ helped me out with my sparkies as my car won't start....took me to autobahn to get them as well... You guys should go to his place to to get work done...hehe :)

he did not know why it wouldnt start, once i arrrived i discovered that hsi spark plugs were fouled due to not replacing his ECU since getting an aftermarket turbo thus fouling the plugs. I fixed his problem and now its running as good as new.

Iceduck312 Collaborator

Iceduck312

Posted
Posted

That was my R34 with FMIC installed there..

I must admit... was kinda reluctant to get a non professional to do my installs.. but I have spent numerous hours on the net chatting to Duc/nozilla and he has shared a great deal of his knowledge with me. So when It came down to installing my FMIC I was glad he could find the time..

During the install there were problems in the braces that had to be angle grinded and he msn me and showed me the pics before the ok..

Now not many places will not spend the time to take photos and show ya before the go ahead.. so yeah.. was very appreciative of it.

I know it was hard work and DUC did it for me for a fraction of the cost that workshops were charging.. ( I actually had to make him take more than what he wanted.. lol.. was feeling guilty..lol.. but u can screw and barter with him if you want..haha he's a TOP bloke)

After a few other installs and mods.. the word will get around about his workmanship..no doubt..

ONCE again..

thanks MATE!!

Now I can use the rest of the money I saved to get the vertical doors. lol..

Cheers

Iceduck out!!

Nightcrawler Grand Master

Nightcrawler

Posted
Posted

yep, and because if they seriously stuff something up, then have insurance to cover it etc .... oh, plus they issue a tax invoice including GST, which I can claim for my business expenses.

But I wish I didn't have to get things done professionally, as

1). EVERY single workshop (except GT Autosound) have ripped me off to the hilt ($70-$90 per hour is RIDICULOUS!!), and

2). Most of them don't actually do good quality work (again GT Autosound excepted) - and most don't give a crap about you or your car, they are interested in getting your job done and the next one in the door.

My 2c

Nozila Grand Master

Nozila

Posted
  • Author
Posted
yep, and because if they seriously stuff something up, then have insurance to cover it etc .... oh, plus they issue a tax invoice including GST, which I can claim for my business expenses.

But I wish I didn't have to get things done professionally, as  

1). EVERY single workshop (except GT Autosound) have ripped me off to the hilt ($70-$90 per hour is RIDICULOUS!!), and  

2). Most of them don't actually do good quality work (again GT Autosound excepted) - and most don't give a crap about you or your car, they are interested in getting your job done and the next one in the door.

My 2c

exactly why i asked if everyone is using professionals/workshops because if something goes wrong they would would be liable.

Cubes Grand Master

Cubes

Posted
Posted
could you put that under my advatar joel or do i need to donate beforehand prior to putting this post up.

I'll leave the thread for a little while, I'll hear from Christian anyway.

Nozila Grand Master

Nozila

Posted
  • Author
Posted

sure joel that sounds resonable to me. There has been ppl having trouble contacting christian myself included, so who do i ask to verify my donation.

kounj002 Enthusiast

kounj002

Posted
Posted

Hi Nozila I was just wondering if you could install a bleed valve for us?... I live in wattle park and have a series 2 R33. I don't really know too much abvout bleeders but I want to up my boost as much as I can without upgrading my stock intercooler and without blowing my turbo...can you supply parts?...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Got just the wing painted and fitted up to the existing boot. Big visual change and about time after having a GTR wing sitting in the shed since 2018 Headed up to Mallala with a quick obligatory stop in at Boliver OTR Oil control mods seems to have worked. I checked the catch can after session 1 and there was a dribble of water/e85 with barely any oil in it. After session 2 and 3 there was almost nothing and I stopped checking after that. so either great success or catastrophic failure/block of the external breather The GTR wing made a noticeable difference in the 160-185km/h sweepers. It was a very hot day for the cars at over 33C but the previously done cooling upgrade/ducting/water sprayers meant I never saw over 60C intake, 105C water and 100C oil and temps would drop back down very quickly once I shut it down. AD09's are a decent tyre but certainly and expectedly a step down when compared the the CR-S/AR-1 I have had on the car for years of track days. The handling characteristics of my car which I often describe using the Tony Hawks Pro Skater balance mechanic where either side of the center is understeer/oversteer was much more pronounced with no "green/safe" zone in the middle. However, imo it steers well/easily during oversteer largely thanks to the custom ACOSTAL front end. Enjoy a loose lap POV with my mate giggling away as a passenger.   Group photo for Peer Pressure Racing made it back home and gave it a wash Overall a great success compared to my previous two track days where i cooked the Starlets motor and blew up the new diff in the R32  
    • PranK
      R32 GTR (USA-Alabama) KG1 1990

      By PranK · Posted

      Nice. I'm looking forward to the updates!
    • Templim
      AC not coming from top vents

      By Templim · Posted

      Ayooo, been a while mates. I have a s2 r33 gtst and air stopped coming out of all the top vents.   My car has always made an actuator gear noise when turning the car on but that's a different issue I think? Did searches and am at process of thinking it's an actuator or some type of motor? I see a few different actuators and don't know which one. Would be nice to know if it was the one that's under the steering wheel so the dash doesn't need to come out.
    • sunsetR33
      Custom titanium intake

      By sunsetR33 · Posted

      Hi, just checking. Did you get this stuff made by Vspec Performance and at what price roughly? Looking into (sometime later) also getting such a intake kit, and Trust as well as HKS don't make a full set like this anymore.
×
×
  • Create New...