Tomei RB26 Metal Gasket Kit
Announcements
-
Similar Content
-
-
Latest Posts
-
Just pulled the passenger apart so got a good idea, also the side bracket that pivots the top half is completely cooked.. how I don’t know.. haha and paid $400 also included a photo of the passenger seat! She is mint -
I managed to get the foam will the original upholstery off in one piece, so will be an easy to re fit thankfully.
-
By Dose Pipe Sutututu · Posted
Then eventually someone in a Tiguan MK2 with an email toon and some random Alibaba pipes. (FWIW, I ran a 12.9s down the 1/4 in the wife's car) -
Not much. It's barely more than an hour's labour. So that-ish plus a boot, clamp strap, some grease. But, being an R32 GTR, when it is up in the air and the driveshaft is out, about $9k worth of other problems will become visible. -
Yes, as above. The welding is an easy enough job. Proper reupholstering, perhaps less so. These, and pretty much all seats of the same era (and probably still) rely on molded foam parts to make the shapes. That foam is the yellow detritus visible in the photos. And it is difficult to replicate. I didn't want the pain, so went aftermarket seats instead. But for "saving a classic".... it's probably worth the kidney and left nut that a trimmer will want to redo them.
-
Recommended Posts