Jump to content
SAU Community

WTB VG30DET Turbo. Busted if possible

Bass Junky

By Bass Junky,
in Wanted to Buy

 Share

Recommended Posts

zoom Community Regular

zoom

Posted
Posted
ARe you selling it?

Got pics?

i'm about to return it back to the seller becoz it wont fit the r33 dump. It's a 300zx single turbo tho! the rear turbine is the same as VL turbo. If you wanna use it as to hybri highflow i dont think it will fit!! You need something esle!! it cost me $550 which is too much anyway if you have to mod the dump or something and importantly i dont think CGC will do it. :werd:

i dont have the pics but look similar to your photo except it has only water cool line, unlike r33 where it has two lines (water & oil).

dennis

WHITE R32 Grand Master

WHITE R32

Posted
Posted

i still have my vg30det turbo unsure if its ceramic but i think its plain bearing (plain bearing = steel wheel???) and a rb25det turbo both may be in good order.... both spin fine and have good wheels i can supply pics and numbers to anyone who is interested.... i know the rb25 turbo is rb25 100% sure i was sold the vg turbo as a vg turbo im 90% sure its vg turbo....

EDIT:: after looking at that pic of turbo mine is different it has a short straight bolt on fitting on the outlet of the comp cover it is t3 flange and it came with a very flat angled oil drain fitting presumably cause the turbos are so low on the vg engines so maybe its a goer??

WHITE R32 Grand Master

WHITE R32

Posted
Posted

here are a few pics for ya.... the turbine wheel wasnt oily like that when u got it i oiled the chra and i think it has wept thru over time cause of the way it has been sitting....

the numbers i can see are....45V3 on the comp cover there is a 2 on the inside of the outlet of the comp cover....

it has a 45v on the turbine housing and a 8 inside the inlet of the turbine housing....

the outlet size of the comp cover is quite large also and there is no step on the inlet of the comp cover like a typical rb series turbo....

Bass Junky Grand Master

Bass Junky

Posted
  • Author
Posted

Check out these two pics.

One says 45v and A on the exhaust housing and

The other says OP6 and what looks like an E or and F

Both are apparently from a VG30DET.

ARGH

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Stagea Front CV Axle Question

      By Duncan · Posted

      I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • soviet_merlin
      Stagea Front CV Axle Question

      By soviet_merlin · Posted

      One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • S1_C34
      Stagea Front CV Axle Question

      By S1_C34 · Posted

      I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...