Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Huddy, I run a RB20DET in my Zed with the GT25-440Hp & it is sweet, currently running std computer with fcd, and it makes 201rwkw@15psi. also have the same turbo on my R33 and it makes 240rwkw at 15psi. there is a lot of adapting to get it to fit/connect but I find it a great option.

cheers

As stated, 2510 on my car. Its definatley not a 2530

Has made a best of 208rwkw, makes peak power at 6500rpm, drops of a little after that, but only 10kw or so

When I first put it on, i had standard injectors and re-chipped ecu, but as the injectors where maxed out, no more power could be had

Running GTR injectors and PFC now, and with the bigger injectors we could add heaps more fuel in the mid-range and wind in more boost

I have attached the first dyno of when I did the injector upgrade, you can see the extra power that was made mid-range! Boost was 1.3bar, but dropping of to 1bar up top due to bleed valve

Running a PFC boost controller now, so it hold power up top more

If I had the choice, I'd run a 2530 if I had to do it all again, or a TD06 like Roy has

yeah, very happy with the PFC, with the whole car really. Sure, a bit more power would be nice, but its only a dyno figure, and a few seconds at full noise can land you in a bit of trouble lately, so its a good compromise

I had it down the 1/4 with the first setup, ran 14.3 at 104.9mph, with a 2.4 or 2.6 60ft, I cant remember

I have done 2 runs with the new setup, but the meet was called of due to rain, so my first run was 14.3ish at 103mph, and my second run was a 14.03 at 102mph, but it started to rain just as I was half way down and changing into 3rd, so it spun the wheels a bit and it showed on the times

Confident it would run a low 13 given the right lauch etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wives never seem to find things funny. Especially when they're trying to sleep, and you've found the new funniest thing ever. I've never seen someone be able to get try and be cranky with me, while they're holding back fits of laughter... 😛   Also, I tell mine it's payback anyway. She has BiPolar. So the household can get quite emotionally wild at times 😛
    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
×
×
  • Create New...