Jump to content
SAU Community

Recommended Posts

Hi,

I'm reasonably new at all of this under the bonnet stuff and, not meaning to sound too stupid, was wondering if someone could help me with what I think is a mis-firing problem.

Sometimes, at around 2000-2500 rpm my R33 seems to momentarily splutter a little and then continue ok. It happens both accelerating and decelerating. :)

Is this symptom of a misfire?

If it is, what is the step-by-step process to check and (if needs be) replace my spark plugs? I've searched "misfire" and "spark plugs" on the forum but there's no step-by-step process for novices like me. :D

Or can my problem be a symptom of something else?

My 1993 R33 is basically stock. Just a 3.5" exhaust from the cat out.

I've only had it for 3 weeks :P and it's done 88000 kms so I had the timing belt, all other belts and water pump done. I don't know if the plugs have been replaced so that's what's got me think about them as the source of my problem.

I can't remember if I had the problem before the work was done because I was too busy giving it a bit of heavy right-foot work. :D

Anyway, any help would be greatly appreciated.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/8008-misfire-maybe-spark-plugs/
Share on other sites

dlskip,

If it was a misfire then I would normally expect it to be higher in the rev range 5-6000rpm, and it would normally be on acceleration only. Do you have and aftermarket computer?

If you've only had it 3 weeks then it should be under warranty, if you bought it from a yard, just ask them to have a look at it.

Otherwise my suggestion is to get it on a dyno, it should only take 1/2-1hour to determine what the problem is, and then you won't have to loose sleep over it.

Good luck.

See'ya:burnout:

Thanks for the quick replies.

raist60:

The problem only happens on light to medium acceleration.

It otherwise idles beautifully.

It also only happens randomly, always between 2000-2500 rpm. It just kind of "hiccups", if you know what I mean.

GTS-t VSPEC:

I don't have an aftermarket computer.

I also didn't the car from a yard, so it looks like I'm on my own for this one. :)

In terms of dyno-testing, how much does it usually cost?

Thanks guys.

i was also wondering about this same sort of thing....mine is fine while acc and decellerating, but just idleing it ''hicups'

however when idling it idles at about 1500-2000 is this to low....

when i had a service done...we incountered a rob which could be my prob...if so i need some advise

when we were changing the plugs...we changed all of them except the on right in the middle under the tubing or something, we were both pulling on the socket tool thing but could not budge the damn plug without snapping the plug......the guy put some sh*t on the plug and said hopefully next time this stuff would losen it up

I dont know if this will help or not but when i first got my r32 the car yard filled it with normal feul and it was back firing and miss firing. When i put optimax and or BP premuim not a problem.

Dont know if that will help

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually,  just remembered there should be info in the threads (somewhere) about swapping to a manual steering rack and deleting power steering all together. 
    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
×
×
  • Create New...