Jump to content
SAU Community

Automatic Gearbox Failing in R33 GTS-T HELP PLZ

habibskyline
 Share

Recommended Posts

habibskyline Enthusiast

habibskyline

Posted
Posted

Hey guys i have a R33 gts-t Automatic, its having some weird problem, i have no idea what it is

it started happenign yesterday, the car will only seem to go to gear 2 highest when appling acceleration, i.e if i floor it, it will only go to redline in gear 2, and just keep bouncing off the rev...it is in Drive...

when i let go, it goes into gear 3 i believe, but as soon as i apply the slightest throttle...the car goes straight back into gear 2, ?

its as if its slipping? i put new automatic transmission oil in, but the oil got burnt straight away...no idea?

anyone no? please help! i hate it

Slide Grand Master

Slide

Posted
Posted

You need to have it pulled apart by an Automatic transmision mechanic.

Did it make a bang when it started?

Or a crunch?

It will get worse and is always better to have something looked at rather than wasting money on little things to dogey it up in the short term.

habibskyline Enthusiast

habibskyline

Posted
  • Author
Posted

na dont remember any large bang or crunch at all...drove it perfectly fine to my mates house, turned it off...

on the way back, tried boosting it, wouldn't go past gear 2 while accelerating, how ever it goes perfectly fine into 3rd and 4th while theres no acceleration applied and just let it roll??

I'll try to do a oil flush and let ya no

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 · Posted

      Hi all. So I have my GTR on the lift and have been working on it a few days and yesterday I unpacked the frontpipe that was wrapped with heat wrap stuff, because part of it was breaking down and soaked in oil. Noticed that the pipe itself does not actually look like a Mines, despite it supposedly being a Mines. But I could not find any fronpipe online that looks exacly like his, and I don't think it is a custom one. My amateur measurement also showed the two pipes are about equal length, so maybe this is just an old version of the Mines pipe? Would appreciate insight on this by the enlightened folks. greetings from Germany
    • silviaz
      Skyline’s charcoal canister !

      By silviaz · Posted

      Yeah. If I plug the connector in and connect the vacuum lines, I assume worse case scenario is that it simply doesn't work? Yep PFC.
    • GTSBoy
      SR20 to cefiro

      By GTSBoy · Posted

      I would think that rather than attempting to perform an engine swap, with all the difficulties associated with doing so in a country where the raw materials required are harder to get hold of, I would just build the CA20 for boost, find an EFI manifold for it and either add a turbo or a supercharger. Or both. You replace one set of difficulties with a different set, but I know which would be more fun.
    • GTSBoy
      Skyline’s charcoal canister !

      By GTSBoy · Posted

      Well, a proper aftermarket ECU** SHOULD be set up to run the purge solenoid, same as the factory ECU would, so that the tank breather system continues to operate the way it is supposed to. I have no knowledge of whether the PFC (which is what I assume you mean when you say Apexi) has an output (and internal logic) to run the purge solenoid. If it does not, then given the product design intent for the PFC, which is to be a plug in replacement for the stock ECU, I would consider that a massive failing on Apexi's behalf and would be another reason to think that they were a half-arsed solution to the problem if programmable management on RBs. I would suggest that since Nistune came to market (which is a LOOOOONG time ago now) there has been no valid argument for choosing a PFC, especially if the PFC can't do things like this.   **ie, Haltach, Link, Motec, etc
    • MBS206
      Shifting questions

      By MBS206 · Posted

      Thanks for asking the question we were all thinking!
×
×
  • Create New...