R32 gtst 4 door Rim sizes

[tstg23r]

Hey everyone. i was wondering whats the largest rim size my r32 gtst 4 door can take without serious modification. i am thinking about 17 " or 18" inch rims.

cheers

[totoro]

hey dude,

i got 17x8 +28 on the front and 17x9 +35 on the rear and they just sit nicely but gurads will need to be rolled for extreme low suspension... mine can fit like 2 fingers now....

so i recommend this set up...

hope this helped....

masahiro

[MerlinTheHapyPig]

^ those are pics of my r32 4dr with SSR Gartmiers. fronts are 18x9 and rears are 18x10. something like +1 offset i think.. (use wheel offset calculator http://marksink.com/tire_wheel_offset/offset.html to work out what offsets will work)

I had trouble with the fronts, as they were scrubbing on edge of the guards. This could have been avoided by raising the car slightly (front is pretty low, stock would probably be alright) and lower profiles on the tyres, and a bit of guard rolling.

Rears had to be rolled and flared to run 10's, but mainly coz of the offset had them out the guards I original had SSR Integral A2's 17x9 and 17x8 (Can't remember offset) and they were fine without flaring or lipping etc.

be careful with flaring the 4-dr's if you have access to a guardroller. They are alright, you just have to be careful with the rears because the door is close. You also get a slight bubble at the edge of the door, but i'm going to get a panel beater to fix that up.

[B-Man]

Drooool - 4 door R32s are hot !