Jump to content
SAU Community

Help!! car runnig shit

boost33
 Share

Recommended Posts

boost33 Contributor

boost33

Posted
Posted

hi

Just recently my car has started playing up, a couple of times I started it up only 2 or 3 times it didn’t want to accelerate, it would but spluttering all through the revs,

Now it got better but it still splutters around 4800-5000 for a split second every time I run the car on the road, only does it 2nd gear onwards (doesn’t do it in 1st)

it splutters more when it cold

Can’t find out what the hell is wrong with it, giving me the shitt !!!!!!!

any idea??????????????? it's a 1997 R33

thanks

Link to comment
Share on other sites
hanyou Grand Master

hanyou

Posted
Posted

hey mate had ur same problem... i changed my fuel filter.. and it only fixed it for liek 2 days then i changed sparkies and fuel pump and then it would only drop revs and stuff up at cold weather... so i got it dyno tuned and found that the stalling was my afm playing up i got a series 2 as well.

Link to comment
Share on other sites
boost33 Contributor

boost33

Posted
  • Author
Posted

cherrs for the reply's!!!!!!!!!!

i will look out the fuel filter and AFM to night

i've checked the spark plugs they are fine, and the coil packs look in good condition

see how it goes!!! :confused:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chocolate Cheesecake.
      Looking for parts for 2003 V35. Specifically a working OEM stereo and passenger side window motor.

      By Chocolate Cheesecake. · Posted

      Thanks to @V35_Paul there is an oem stereo available on gumtree, but the fascia is slightly different. It has a flip up screen as opposed to my pop up screen. Am I able to disconnect the radio/cd player from the fascia to use it on mine?    
    • Dose Pipe Sutututu
      Lets play a game - What is causing my oil consumption?

      By Dose Pipe Sutututu · Posted

      Had to google what a quart is lol.. so rough as guts a litre. That's a bit excessive, also what oil weight are you running? The whole steam cleaning idea isn't too far fetched either. Maybe as you suggested, turn off the WMI (assuming your Kebabtech pulls timing, boost, etc.) and run it for a bit and see if there are any noticeable changes in spark plug colouring.
    • joshuaho96
      Is this pressure plate warped? And do I need a new one?

      By joshuaho96 · Posted

      Pretty simple question. I was about to put the transmission back in and thought I pretty much had it lined up when I noticed it seems like the pressure plate isn't flat. I was pretty careful when undoing the bolts both during initial disassembly for cleaning and when torquing them up for installation so this is pretty discouraging. I'm not sure if I accidentally bumped the pressure plate with the input shaft and bent it somehow or if it just showed up this way. Is it possible that there's just something obvious I'm not doing correctly? I'm pretty sure I was extremely careful to make sure the friction discs were seated correctly in the hub, everything lined up, flywheel torqued according to sequence, the little springs all sitting correctly in their seats, etc.  What's the play here? Do I jump straight to a new pressure plate?
    • GTSBoy
      Nismo 1.5 way Stub axle issue

      By GTSBoy · Posted

      OK. I can see that being the case. But if you live in the land of "only switching between 4.08, 4.11, 4.36" like most Skyliners, then you never encounter it. Now I perhaps understand why the crownwheel is thicker on some of the smaller numerical ratio diffs. The two stubs being the same (unequal) lengths and just swapped side to side between the different cases is a new one to me. I'm hating Nissan R200s more than ever now.
    • Butters
      RB gearbox options

      By Butters · Posted

      Reason I say this is I have seen broken ones, in drift, drag and even behind a stock Z. I do appreciate most of the time its the synchro's that go.   Trouble with quoting HP is it doesn't really say how strong the box is.  I've not seen many CD00X box's make it past a mid 9(150mph) I have seen about a stock R33 RB25 box's run a 9 too, they all go boom at some point though.   Another clue is they make gearsets for CD00X box's too, wouldn't be a market if they didn't break or have a limit people are going past.   I totally agree it is a strong box, just have to weigh up the true total cost of the conversion vs rebuilding with a good gearset. 
×
×
  • Create New...