Jump to content
SAU Community

Nissan Import - Random In Cabin Heat


Recommended Posts

Hey guys,

I've notice a lot of nissan imports such as Skylines, Silvia's etc have random in cabin heat. That is the heater seems to run itself even when its off and pump heat out at the feet when it feels its cold outside. It seems to decide that its cold out side and it should warm up the drivers and passengers legs. You can feel the heat come out. If you turn on the Heat/AC and put it to say 18 deg and let it go for a second u get cold air. If you then turn it off and wait about a minute the warm/hot air comes back and its like self heating again. It doesn't always do it and just a very odd little feature I noticed.

Does anyone else have this same feature? Any ideas what it basis it's "turn on " action on? When does it decide to come on? What temp does it run for, and how long?

Link to comment
Share on other sites

From what i notice, even when the climate control is off, you can adjust the temp by pressing up and down. It also seems to 'leak' air into the cabin at whatever temp you have it set to like you say... But usually if i leave it on 18 hot air doesnt' come in.. if i leave it on 25 hot air does come in etc...

Link to comment
Share on other sites

when the air is turned off the vents near the peddles open up. Other than that, my 33 doesnt leak any hot / cold air.

Does your car have the 'auto' button next to the a/c button ?

'auto' button turns climate control on / off :)

Link to comment
Share on other sites

I get what ferni gets. Cold air if the knob on the climate control is on cold and hot air leaks when on hottest. I leave it on hottest cos it makes driving in winter with the window down bearable without running the heater.

Link to comment
Share on other sites

ill have to do some testing. but yes i do have the auto bottom, but if you press that it comes on and the display shows temp and fan speed etc. but i have this problem when its off. like no display at all. my mate with an s13 silvia had the same thing, just random heat comes out even when the heater/aircon are off. ive heard of this from a few nissan import owners. sounds like somethinf theyve done on purpose based on the jap climate ??

Link to comment
Share on other sites

same thing happens on my R33.

Justin: Its not a breeze, its just the slightest bit of warm air, and you can only *just* feel it. Seems to me it must be a feature that Nissan include, like Paul said, due to the cold climate in Japan.

Link to comment
Share on other sites

I have seen this on Paul's car as well as another 33 similar vintage for no known reason you dont nesicarly feel the heat blowing either it just seems to radiate almost.

The thing with the heat really constant is it just doesnt stop and you get to a point where you have to do a heat dump or else you will just start to overheat.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Because there is still an engine underneath that turbo. PSI is not a measurement of power, it's a byproduct of resistance. What would be really decent is to have a CFM gauge on the output of a turbo to see how much it's actually pushing. 21psi (as an example) is not the same amount of air at 3000rpm as it is at 7000rpm, even if the boost controller is controlling boost at "21psi". The engine is inhaling and exhaling way more air at 7000 than at 3000, even if it's less efficient.
    • don't want anything more or less, I don't really understand why the torque still goes up to 6000-6500, while the boost peak is around 4000. if it only comes from the cams or from the boost controller etc.  
    • I'm not sure you understand the physics of what you are asking. Can you draw on the dyno graph what you want to have happen? I'm thinking this is a functional impossibility here, unless you chose a turbo literally so laggy that torque is at max at 7000rpm and artificially choked prior to that. Power and Torque are intrinsically linked. Power is just Torque over time. What you're really seeing in the torque graph is "Power per RPM" if that makes any sense whatsoever. You still get more power at 7000rpm than 5000rpm, because it is "power per RPM" and you have more RPM. at 7000 than you do at 5000. You still feel more powerful at 7000rpm. The torque graph will influence the rate of power increase per RPM.
    • Welcome!  If possible,  would live to see some pics. How long was it away getting the work done? Hopefully it feels like a new machine.
    • yes indeed the graphic format makes a visual difference but there is on average 120nm more between 4000 and 6000rpm on the curves it is not nothing. you are right, the cams influence the torque curve. I was able to chat with one of the Hypergear tuners, he confirmed that a boost control allows you to manage the pressure after the spool. the absolute pressure (psi) on the graphics is measured where? It seems that the cams affect the maximum pressure depending on the regime but I may be wrong.   not pleasant to drive before 4000? if we spend our lives between 1000 and 3000 rpm as you say then we might as well just run diesel turbos
×
×
  • Create New...