Jump to content
SAU Community

Shuddering brakes on GTR

Godzilla32
 Share

Recommended Posts

Godzilla32 Veteran

Godzilla32

Posted
Posted

Hey im having trouble with shuddering brakes. I had the 4 original ones machined for RWC and then after one nite out after hard braking they began to shudder. After this i bought a set of brand new (undrilled) stock front discs as they were very cheap, thinking it would solve my problem. And it did for awhile but i still notice a very slight amount of shudder at times normally only when going quite slow. I've had my original discs re-machined since and thinking to try them again. What else could be causing this shudder? Can it be the pads wearing the discs badly? They are stock pads.. Any ideas?

Thanks guys,

Deren

Link to comment
https://www.sau.com.au/forums/topic/80768-shuddering-brakes-on-gtr/
Share on other sites
GTRgeoff Grand Master

GTRgeoff

Posted
Posted

At a guess I'd say that you completed one of your big stops and left your foot on the brake at a light. Maybe even more than once.

This allows the pad material to propagate through the disc upsetting the grain structure and the wear characteristics.

Alternatively it can cause a differential cooling rate allowing some areas of the disc to cool at a rate wherby cementite forms, which a form of steel that is tougher and more resistant to wear. What then happens is some parts wear faster than others and you get pedal shudder.

Try the originals and see how it goes. It may not be too bad.

Just remember to have time to run a cooldown after hard braking periods and don't use the handbrake to park if the brakes are still really hot. If you are doing it on the street it's only a matter of time before something goes wrong, so come to the racetrack with us and go fast responsibly.

r33GTS-t-200kw Enthusiast

r33GTS-t-200kw

Posted
Posted

whenever i do machining i either replace the pads or re-surface them on a huge ass drop saw grinding disc and file the edges so they are not sharp to make sure they dont squeel

Could be the problem if ur pads are like bendix ultimates or a hard make up of pad they would still feel yucky

my 2c.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      High temp brake fluid?

      By Murray_Calavera · Posted

      I've always approached this as, price is comparable between low temp and high temp fluid. Just put in the high temp fluid. I've not going to lose any sleep thinking about could I have saved $20 on brake fluid that is going to live in the car over the next 2 to 3 years. 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nah, the creases were pretty large, and the sheet metal is pretty thin and hard to work out, time alone is in the hours to fix, and would probably have more bog than I would be happy with In other, more happy news, I gave MX5 Mania a call and they have a few clean boots available for $400 a peice, I've contacted Fineline and given them their contact details, I'm a idiot for not thinking of them sooner
    • GTSBoy
      High temp brake fluid?

      By GTSBoy · Posted

      That really depends on how hot the brakes get and how much of any heat is transferred into the fluid. That really makes it at least a vehicle specific question, and more than like a specific vehicle specific question, depending on what brakes (ie stock, bigger rotors, different calipers) or even what pads are on it. And then there's the question of cooling air. Is there plenty stock? Is there no special cooling arrangements stock? Has some/more been added? In other words, I think you have to do the experiment to obtain the data. And if you;re worried - tie on some ducting?
    • PranK
      High temp brake fluid?

      By PranK · Posted

      In all the track days I've done over the past few months I've only had 1 issue with braking and thats with my current EBC pads (can't remember the colour, but they're not a track pad). I don't *think* I have had issues with brake fluid getting too hot, my understanding is that when that happens you will have quite noticeable brake loss - which I haven't had.  I'm using just regular ol' Penrite Super DOT4 fluid. I use this fluid in everything and my cars always seem to stop so I see no reason to change, except ... for the 335i. I need to do a fluid flush and was thinking about my fluid of choice and wondering if I should consider using something more high temp? Its not a super fast car by any standards but I'd hate to do a flush and then find myself with no brakes when I get. to Wakefield.  I guess, my question can be summed up as "How fast do you need to be driving to need higher temp brake fluid?"  I remember high temp fluid was considered a must have back in the day when I had my GTR. 
    • Jason Abell
      RB25DET in GTS4 R32 conversion

      By Jason Abell · Posted

      For anyone that comes here looking for answers on what can go wrong with gts-4 to rb25detneo swap. The Gloria's awd sump is different and does not fit. The rb25neo from stagea are exactly the same sump bolt pattern and axel alignment. Castings numbers are different on Gloria's blocks and oilpans if they need to be identified.
×
×
  • Create New...